Lrbners XLR splitter cable 2FT
Product description
If your setup needs one XLR output sent to several nearby destinations, a compact splitter can be simpler than adding a more elaborate routing system. The Lrbners cable is designed to take one male XLR connection and fan it out to four female XLR connections for amplifier, monitor, or recording feeds.
Its 2FT length makes it a rack- or desk-side tool, not a cable for reaching across a room.

Best use cases


Use this cable when a single source needs to feed several pieces of equipment at once. For example, an XLR output from a mixer could run to the splitter, with the four female ends routed to nearby amplifier inputs or monitor feeds. The colored connector strain reliefs—red, yellow, blue, and black—make it easier to keep destinations straight when you’re patching or troubleshooting a crowded rack.

This is a distribution cable, not a mixer. It doesn’t provide separate level controls or let you create different mixes for each output. Need four separately adjustable mixes? That calls for a different kind of routing setup. The intended benefit here is a straightforward way to share one signal, with fewer separate adapters to manage in a compact space.
Product specs



- Connection layout: one male XLR to four female XLR outputs
- Length: 2FT (0.6m)
- Connector housings: zinc alloy, with locking latches
- Cable exterior: braided, with color-coded female connector strain reliefs
- Shielding: the listing describes foil and copper-braid shielding
The product is presented as a passive splitter. That distinction matters: it distributes the source signal rather than amplifying it. The listing doesn’t provide details about supported cable runs or connected-device requirements, so make sure the rest of your signal chain suits a passive split before building a larger setup around it.

Where it shines


The short length is useful when the source and destinations sit close together, such as within the same rack or on a compact desktop. The braid is intended to help the cable resist tangling and surface wear, while the locking latches are meant to keep XLR connections from pulling free accidentally. Those details are practical in setups that get repatched, moved, or handled during events.

Color coding can also save time: assign each connector to a destination and keep that mapping consistent. It won’t label the equipment for you, but it gives you a quick visual cue when several similar XLR feeds are grouped together. The connector materials and cable construction are listed on the spec sheet, there’s no stated test data here to establish performance in every noisy environment.
Buying verdict

Worth considering if you need to distribute one XLR output to four nearby destinations and want a compact cable with color-coded ends. Compared with building a more flexible routing system, this is a simpler, passive approach—but it doesn’t add amplification or independent control. Better avoided if the endpoints are far apart, you need different mixes or levels, or your setup requires a specific run length that 2FT won’t cover. Check the physical layout and signal-routing requirements first, this cable makes most sense when the source and all four connections are close at hand.
Products with discounts that might interest you
- VPFET SW223-Deep Blue Dual-Monitor DisplayPort KVM Switch, 8K and USB 3.0
- Largest 11.3" Portable Carplay Screen with Wireless CarPlay/Android Auto and 4K Dash Cam
- GANA HDMI Switch 4k@60hz Bidirectional
- UGREEN CM568 5-in-1 HDMI Switch, 4K@60Hz, Remote, HDR and VRR
- 8K HDMI KVM Switch Dual Monitor 8K@60Hz
- AV Access KVM Switch Dock 4K, 60W PD
- J-Tech Digital 4K HDBaseT HDMI Extender Over Cat5e/6 Cable
- Acer HDMI Switch 2-in-1-Out, Bidirectional 4K@60Hz Video Switcher
- MT-ViKI HDMI Splitter 1x4 4K
- Anker HDMI Switch A83H1, 2-in-1-Out 4K@60Hz HDMI Selector
- J-Tech Digital JTD-MINI-1X2SP 4K@60 HDMI Splitter 1x2 Powered (1 in to 2 out)
- avedio links HDMI Splitter 1x2 4K 60Hz
- Steetek HDMI Extender 1080p@60Hz (3D) over Cat5e/Cat6/Cat7, 1TX + 4RX kit up to 50m
- CMSTEDCD GMXUS-SW219S-Grayish Black HDMI KVM Switch, 4K@60Hz
- JCHICI US1-SW501-4K-BS HDMI Switch, 5 Inputs, 4K at 60Hz, Remote
- Monoprice Blackbird Series 2x1 HDMI Switch (HDMI 2.1, 8K@60Hz, 4K@120Hz)
- OREI HD14-EX165-K 4K HDMI Extender Splitter 165 ft
- TIMBOOTECH Wireless HDMI 165FT extender
- USB3.0 KVM Switch 4-Port 4K@60Hz 🎛
- HDMI KVM Switch for 4 Computers
- AV Access 8K KVM Switch: 3 Monitors, 2 Computers, Dual-PC Docking Station
- OREI SplitExtend HDMI splitter 4K
- J-Tech Digital JTECH-18GAE2 HDMI Audio Extractor/Embedder (4K 60Hz, SPDIF + 3.5mm) with HDR10, HDCP 2.2 support
- Anker HDMI Switch 4-in-1

