Creality Space Pi filament dryer 80 W

A filament dryer is one of those upgrades you only notice when you get poor prints, but once you have drier filament the difference is clear. The Creality Space Pi filament dryer helps reduce the impact of ambient conditions by drying filament during printing, supporting more consistent results for 3D models. It combines a heated storage box, 360 degree hot air circulation, and an LCD touch interface so you can track conditions without guesswork.

If you work with materials that can pick up moisture, having a reliable way to dehydrate filament can be practical. This Creality Space Pi setup is designed to dry filament while you print, which can help minimise drying related variability between runs. It also focuses on even heating, so the spool holder is intended to support uniform warming across the drying space. 🔥

Key takeaways

The Creality Space Pi blends filament drying and storage into one enclosed unit, so you can keep filament in a controlled heated environment while you’re printing. With 360 degree hot air circulation from a built in fan, the dryer is intended to help distribute heat evenly instead of relying on a single warm spot. That matters because moisture and inconsistent heating can affect how a filament behaves during extrusion.

You can set drying temperature between 45 C and 70 C, then choose a drying duration from 0 to 48 hours using the built in controls. The touch screen display gives real time visibility of temperature and humidity, plus a countdown timer for your drying session. This makes it easier to repeat the conditions you used previously, rather than starting each print from scratch.

There’s also a parameter memory feature, so after a power cut the dryer can restart with the previous material and temperature settings. For everyday makers, that can save time and reduce uncertainty when you’re working with multiple filament spools. 🧩

The Space Pi dryer is compatible with multi diameter filament spools, supporting 1.75 mm, 2.85 mm, and 3 mm filament sizes. It’s also set up for a range of filament types, including common and higher performance materials such as PLA CF, PA CF, and ASA, up to 12 filament options according to the manufacturer description.

Tech specs

• Type: Filament dryer and storage box
• Name: Creality Space Pi
• Heating method: 360 degree hot air circulation with built in fan
• Heater: PTC heater rated at 80 W
• Display: 3.7 inch LCD touch screen
• Temperature range: 45 C to 70 C
• Filament diameter compatibility: 1.75 mm, 2.85 mm, and 3 mm

What stands out

One of the most useful design choices here is the heating approach. The Space Pi uses an advanced PTC heating system described by the manufacturer as helping deliver more uniform drying compared with dryers that rely on a heating pad method. The dryer is intended to heat the drying space quickly, with hot air circulated around the chamber rather than warming only one area.

For control, the 3.7 inch touch screen is designed to show real time temperature and humidity, plus the drying countdown, so you can monitor progress as it happens. You can also select different filament profiles quickly, with support for up to 12 types mentioned in the product description. This can be helpful if you regularly switch between materials and want consistent starting points.

It also includes a timer function that can be adjusted from 0 up to 48 hours, which covers short prep drying and longer sessions. Keep in mind that drying performance depends on how wet your filament is when you start, and on your room conditions. For many users, the benefit is that you can standardise conditions and reduce moisture related surprises.

As part of day to day usability, the memory of power loss settings means you do not have to re enter the same temperature and material profile after interruptions. That’s a small detail, but it can make a noticeable difference when you run prints at busy times. ✅

Tech summary

The Creality Space Pi filament dryer is built around the idea of drying filament in the process, helping improve print quality while reducing external environmental influence. Its 360 degree hot air airflow, PTC heating system, and touch based interface are aimed at making drying more consistent and easier to repeat.

You can set temperature and drying duration for different filaments, with a supported range from 45 C to 70 C and a timer up to 48 hours. It also supports multiple filament diameters, so it can suit setups that use 1.75 mm, 2.85 mm, or 3 mm spools. If you want a controlled heated storage and drying solution that focuses on monitoring and uniform heating, this Creality Space Pi option is worth considering for your workflow. 📦