ELEGOO PLA+ 1.75mm 4 kg filament bundle
Product description
This PLA+ filament bundle from ELEGOO brings tougher, low-warp printing material in four bright colours for everyday FDM projects. It is aimed at makers who need more impact-resistant PLA with consistent feeding and a glossy finish, useful for prototypes, functional parts and colourful models.
Key Points

The pack contains four 1kg spools in red, orange, yellow and neon green, offering 4 kg of PLA+ filament with a 1.75 mm diameter. According to the manufacturer, the filament has improved toughness and impact strength compared with standard PLA, and it prints at lower temperatures which can simplify the setup for many printers. Spools are mechanically wound and manually inspected to reduce tangles and breakage during printing. The material is vacuum sealed and fully dried before packing to reduce moisture-related issues such as bubbling and clogging.


Technical Specifications

- Name: ELEGOO PLA+ Filament 1.75mm Bundle 4KG
- Diameter: 1.75 mm with dimensional accuracy of +/- 0.02 mm.
- Weight: 4 x 1 kg spools (approx 2.2 lbs per spool).
- Colours: Red, Orange, Yellow, Neon Green.
- Compatibility: Fits most 1.75 mm FDM 3D printers.
Advantages



The PLA Plus composition aims to deliver stronger layer adhesion and greater impact resistance than regular PLA, which helps when printing small mechanical parts or objects that may be handled frequently. The glossy surface finish tends to require less post-processing when appearance matters. Consistent diameter and low warpage reduce failed prints and feeding problems, making prints more reliable across longer jobs.
Usage Recommendations

Start with the manufacturer’s suggested print temperatures for PLA+ and adjust by small increments if you see stringing or poor layer bonding. Because the spools are vacuum sealed and dried, allow the filament to reach room humidity before loading if stored in cold conditions. For best results on functional pieces, test a small tolerance cube to confirm dimensional accuracy and tweak settings for stronger infill and wall parameters where impact resistance is needed. Consider storing opened spools in a dry box or with desiccant if you do not plan to use them immediately, as PLA+ can still absorb moisture over time.
Products with discounts that might interest you
- IEMAI PETG Filament 1.75mm 10kg – Gradient Translucent PETG for 3D Printing
- ELEGOO Rapid PLA Plus 1.75mm Black PLA+ 3D Printer Filament (4kg bundle)
- SUNLU 5KG PLA+ 3D Printer Filament Bundle (5x 1KG spools), 1.75mm, PLA Plus Transparent (White/Orange/Red/Blue/Green)
- SUNLU Macaron PLA Meta 1.75mm filament
- SUNLU PLA+ 1.75 mm 1 kg PLA filament
- YOOPAI Creality PETG Filament 1.75mm (1kg) for most FDM printers, transparent
- SUNLU PLA Plus 3D Printer Filament - Upgraded PLA+ (1KG, Red) with Neatly Wound, 0.02mm Tolerance
- Creality Space Pi filament dryer 80 W
- ELEGOO PLA Filament 1.75mm Dark Blue 1KG – Precision 0.02mm for Everyday FDM Printing
- ANYCUBIC PLA Filament 1.75mm, RFID 1kg Spool – Smart, Consistent Printing for Everyday Projects
- ELEGOO Rapid PLA Plus Filament Bundle (1.75mm) – White, 4kg total
- Creality Official Space PI Filament Dryer for 1kg spools (built-in fan, 110W PTC heater, one-key presets)
- eSUN PLA+ Filament 1.75mm – Enhanced Toughness, 2 Spools (2 x 1kg) in Grey
- ELEGOO PLA Filament 1.75mm Orange 1KG – Precise, tangle-free and printer-friendly
- ANYCUBIC PLA Filament 1.75mm, 1kg Spool – Accurate, Clean 3D Printing
- eSUN PLA+ Filament 1.75mm (2 Spools) — ePLA+HS High Speed 3D Printer Filament, 1KG per Spool, Grey
- ELEGOO PLA Basic Refill Filament 1.75mm Bundle (4kg) – Black, White, Red & Cobalt Blue
- Anycubic PLA Filament 1.75mm (Black/White) – Intelligent RFID Identification, 2 Pack 1kg
- Overture High Speed TPU Filament (95A) 1.75mm Flexible, Black—clog-free, smooth prints for FDM
- 3DHoJor PLA Pro 1.75mm Filament (Light Blue) – 1kg cardboard spool, vacuum sealed for most FDM printers
- SUNLU PLA+ 2.0 Filament 1.75mm (Lavender Purple) — stronger, less brittle PLA+ upgrade
- TECBEARS PLA 3D Printer Filament (1.75mm) – Neatly Wound, 4KG Bundle, Black
- Zeberoxyz 2pcs Heated Bed Insulation Mats (foil-backed foam) for 3D printer hotbed
- ELEGOO Matte PLA Filament Bundle 4KG (1.75mm) for 3D Printers



