Anycubic PLA Filament 1.75mm (Black/White) – Intelligent RFID Identification, 2 Pack 1kg
Product description
What it is and what it’s for
This Anycubic PLA filament is aimed at everyday FDM 3D printing: prototypes, visual parts, quick functional models, and the kind of prints where you want consistency more than drama. It comes as a 2-pack (Black + White) on reusable spools, with 1.75mm filament diameter for machines that use that size.
On paper, the big selling points are dimensional consistency (a stated tolerance of ±0.02mm), reduced shrinkage, and an anti-clog / anti-bubble approach to help prints run more smoothly. There’s also “intelligent identification” via RFID intended to reduce the fuss of manual setup.
That combination can be a good fit if you want fewer surprises between print jobs. It may not impress you if you’re chasing the most demanding, engineering-grade performance—PLA is generally more of a practical, easy-to-print material than a “for everything” solution.
Key points
If you prioritise repeatable results, this PLA is designed around stable dimensions and smoother feeding. The filament is described as coming out homogeneous with a low-shrinkage behaviour, which matters when you’re trying to keep layer adhesion steady and bridging more reliable.
It also leans towards day-to-day convenience: easier spool handling (it’s described as neat on the roll and able to come off without crossing) and a dried, vacuum-sealed pack intended to support more stable printing.
The RFID element is a nice idea, but there’s a clear limitation: it’s only available for the Anycubic Kobra 3 Series. If you don’t have that printer family, you’ll still be using PLA the same way—just without the automatic optimisation.
What you’ll notice in use
Where this filament is likely to feel most “worth it” is in how predictable it behaves during feeding and extrusion.
The description emphasises low stringing and twisting, plus fewer issues like jamming or sub-extrusion (under-extrusion). In practical terms, that’s the stuff that can turn a weekend print into a frustrating re-run: partial clogs, inconsistent flow, or thin gaps where you expected solid material.
A simple example: imagine printing a small bracket with short spans that need bridging. If the filament is stable and has low shrinkage, you’re more likely to see cleaner bridges and less sagging than with more variable material. And because the product claims the diameter won’t swing much during printing, the feed speed doesn’t need to compensate for thicker/thinner sections of filament.
That said, no filament is magic. If your slicer settings, temperatures, or airflow are wildly off, you can still get mediocre results. This product should help with consistency, but it can’t replace good setup.
Tech specs
- Name: Anycubic PLA Filament 1.75mm
- Type: 3D printer filament (FDM)
- Format: PLA filament
- Size: 1.75mm
- Dimensional accuracy: +/- 0.02mm (minimum dimensional tolerance)
- Quantity: 2 pack
- Weight: 1kg per spool
- Colour: Black + White
Tech summary: intelligent RFID identification (and when it matters)
This filament includes RFID filament identification intended to work with Anycubic Color Engine Pro, with the idea that your printer can detect the filament type and automatically optimise settings. The benefit is less fiddling with configuration and potentially less filament waste.
Important limitation: the description states that this intelligent RFID feature is only available for the Anycubic Kobra 3 Series. If you’re using a different FDM printer, you should treat the RFID part as unavailable rather than a promise you can rely on.
If you do have the Kobra 3 Series, it can be a real time-saver—especially if you swap colours or run through multiple spools. If you don’t, the purchase decision should be based more on the PLA consistency, drying/packaging, and feeding behaviour.
Compatibility, filament behaviour, and expectations
The manufacturer claims wide compatibility with most FDM 3D printers that accept 1.75mm filament. Also, PLA is described as having a lower melting temperature and not needing a heated bed.
On top of that, the filament is described as being made from raw starch materials derived from renewable plant resources, and as producing low smell / non-toxic printing (as stated). That’s a plus for people who print at home and want a more forgiving material profile.
Still, “no heated bed required” can be situation-dependent. Depending on your printer, ambient conditions, and print geometry, you might still want bed adhesion support. So it’s worth considering your usual PLA routine rather than assuming every setup will behave the same.
Care & storage notes (worth taking seriously)
The product is described as completely dried for 24 hours before packaging and vacuum-sealed with desiccant in a nylon bag. That suggests the filament is being protected from moisture at the point of sale.
Practically, if you’re opening the bag and then leaving filament out in a damp environment, moisture absorption can still happen over time—so having a storage plan (even a simple dry box or sealed container) can help preserve print quality.
Is it worth it?
It’s a solid pick if you want 1.75mm PLA that’s geared towards consistent output, smoother feeding, and fewer common extrusion headaches like stringing, twisting, and jamming. The ±0.02mm dimensional accuracy claim and low-shrinkage focus are especially relevant if you regularly print bridges, multi-layer parts, or anything where layer-to-layer consistency affects appearance.
You may want to skip it if you’re not using an FDM printer that takes 1.75mm filament, or if your printer isn’t the Anycubic Kobra 3 Series—because the RFID auto-optimisation feature won’t apply. Also, if you’re expecting “engineering material” performance beyond typical PLA behaviour, this is more of a practical PLA choice than a high-end specialist.
If you’re buying for day-to-day printing and you value easy handling, predictable results, and colour variety (Black + White in this pack), this one makes sense. Just double-check your printer’s filament size and be realistic about what PLA is best at.
Mini FAQ
Will the RFID feature work on any printer?
No. The description says the RFID-based intelligent identification is only available for the Anycubic Kobra 3 Series (via Color Engine Pro).
Is 1.75mm definitely the right size for my printer?
This filament is specifically 1.75mm, so it fits printers that use that filament diameter. If your machine uses a different size, this won’t be the right match.
Does it require a heated bed?
The description states PLA has lower melting temperatures and that no heated bed is required. In practice, bed adhesion needs can vary with prints, so it’s worth following your usual PLA approach.
Is it easy to feed and reduce stringing?
The packaging claims smoother feeding and less stringing/twisting, along with reduced risk of clogging and bubble issues—so it’s designed to be run with fewer extrusion problems.