Nulaxy Bluetooth Adapter with Screen
Product description
If you mainly want wireless audio from a plane or TV, a transmitter is the feature that matters, if you want to send audio from your phone to a wired speaker or car stereo, you need receiver mode. This Nulaxy adapter handles both jobs through a 3.5mm AUX connection, so it can cover more than one listening setup without requiring a separate transmitter and receiver. Its screen adds a useful status check when pairing, while support for two Bluetooth headphones is geared toward sharing audio rather than listening alone.
Highlights

In TX mode, the adapter sends audio from a compatible source, such as an airplane or TV, to Bluetooth headphones. In RX mode, it receives Bluetooth audio and sends it to a wired device, including a speaker or car stereo with a 3.5mm AUX input. That two-way setup is the main reason to consider it over a basic one-mode adapter: it can move between travel listening and an existing wired audio system.
The built-in screen shows the connection status, device names, and current operating mode, which can make it easier to tell what is connected without relying only on button presses. It also supports two Bluetooth headphones at once, handy when two people want to watch the same movie on a flight. The listed battery life is up to 20 hours in RX mode and 15 hours in TX mode. Qualcomm processing and low-latency performance are intended to help keep audio and video in sync, though the description does not give a specific latency figure.



Best use cases
This is aimed at people who move between audio sources: sending sound from a plane’s 3.5mm jack to wireless headphones, watching TV without being tied to wired headphones, or receiving phone audio on a compatible car stereo. For a travel example, connect it to the airplane’s headphone jack, pair two headphones, then use the screen to check the connection before settling in. Its compact design also makes it easier to carry between a flight, gym session, and home setup than a dedicated device for each place.

It suits you if you want both TX and RX modes, a display, and the option to share sound with another headphone user. It might not be a great match if your audio gear depends on hearing aids or musical instruments, the product description specifically says it is not compatible with either. Keep in mind that its wired connections rely on a 3.5mm AUX port, so a source or speaker without that connection is not covered by the listed compatibility.
Tips for day-to-day use



Choose TX when audio should go from a wired source to Bluetooth headphones, and RX when Bluetooth audio should reach a wired speaker or stereo. The screen can help confirm the selected mode and paired device names, especially when switching between setups. From the way it is set up, it makes most sense to treat the AUX connection and the mode selection as the two things to sort out first, rather than expecting it to connect wirelessly to every source.
For shared listening, pair both headphones before starting a movie or music. Battery life differs by mode, so the stated 20 hours applies to RX and 15 hours to TX—not the same runtime in both directions. Those figures may help with planning a long listening session, but the listing does not specify charging time or how battery life changes with use.

Before you decide
Can it send audio to two headphones? Yes. The description says it supports two Bluetooth headphones at the same time.



Can it work with a car stereo? It can receive Bluetooth audio and send it to a car audio system with a compatible 3.5mm AUX connection.
Does it work as both a transmitter and receiver? Yes. TX sends audio from a wired source to Bluetooth headphones, RX receives Bluetooth audio for a wired output device.
Final verdict
Choose the Nulaxy if one portable adapter needs to handle both airplane or TV listening and Bluetooth-to-wired audio, and you value a screen and shared headphone listening. A simpler single-mode adapter may be enough if you only need one direction, while this one’s usefulness depends on having a suitable 3.5mm AUX connection. Its stated exclusions also make it the wrong fit for hearing aids or musical instruments.
Products with discounts that might interest you
- SKUYA USB-C to HDMI Adapter 4K@60Hz
- SiYear DMX adapter cable, 30 cm
- LuccLinc XLR to 3.5mm audio cable, 10 ft
- RUUPRRN DisplayPort to HDMI Adapter 4K@60Hz
- UGREEN DisplayPort to HDMI Adapter 8K@60Hz
- Anker 310 USB-C to HDMI Adapter (4K@60Hz) — USB-C to HDMI for MacBook Pro/Air, iPad Pro, Thunderbolt 3
- UANTIN DisplayPort to HDMI Cable 3FT
- LAMTTO Wireless CarPlay Adapter with Gemini AI: Full Google Play, 4GB RAM + 32GB Storage
- JSAUX 4K DisplayPort to HDMI Adapter, 10FT ⚡
- Apple Lightning to 3.5mm Headphone Adapter 2-pack
- BENFEI 4K DisplayPort to HDMI Adapter ⚡
- UANTIN USB C to HDMI Cable 6Ft 4K
- J-Tech Digital HDMI Audio Extractor 4K 60Hz with ARC: HDMI to Optical & RCA Converter (JTECH-EXD-ARC)
- UGREEN Magnetic USB C 60W Adapter
- Silkland 8K HDMI Extension 1M 🔌
- BENFEI 4K DisplayPort to HDMI 6ft cable 🔌

