NEWCARE RJ45 Ethernet Splitter 1000Mbps for 2 devices

This compact RJ45 adapter expands a single wired connection into two simultaneous Ethernet ports, useful when you need to add a device without running extra cabling. The 1000Mbps ethernet cable splitter helps share one network feed between two devices while maintaining gigabit-capable links up to 100 metres, according to the manufacturer. It is a simple way to extend connectivity in a home office or small workspace.

Key Points

This splitter is a physical solution for situations where additional network sockets are needed without access to a switch. It allows two devices to be connected at the same time and supports Gigabit speeds per cable when the connected hardware negotiates those rates. The unit includes a USB power cable to support stable operation and has LED indicators so you can check port status at a glance. ⚡️

A note to consider is that the performance depends on the connected devices and the network environment. The product supports multiple cable categories, but the actual throughput may vary according to cable quality and device capabilities. 🔧

Technical Specifications

• Name: NEWCARE RJ45 Ethernet Splitter 1 to 2 Out
• Maximum transfer rate: 1000Mbps per cable
• Supported cable categories: Cat5/5e/6/7/8
• Maximum transmission distance: 100 metres
• Power: USB power cable included

Practical Tips

Place the splitter in a ventilated spot because the metal shell helps dissipate heat but still benefits from airflow. If both connected devices are expected to use heavy bandwidth at the same time, confirm that routers or modems upstream can handle two concurrent gigabit links. For short-term troubleshooting, the LED indicators help identify whether a port is active or not, which is quicker than testing cables one by one.

Consider using higher category cable when running longer lengths or when maximum stability is required. Cat6 or better will give more headroom for error reduction and sustained throughput, especially in environments with multiple sources of interference. 🛠️

Usage Recommendations

Use this adapter where running a second cable is impractical, such as behind mounted TVs, in compact media cabinets or where wall ports are limited. Insert the incoming network cable and then connect two device cables to the splitter’s outputs. The device is plug and play, so no configuration is required in most setups. Note that this splitter is not a replacement for a managed switch when you need independent IP routing, PoE or advanced traffic control, and it may not be suitable if both devices require full independent network links beyond basic sharing.