ELEGOO Matte PLA 1.75 mm 1 kg filament ๐จ
Product description
This white matte PLA filament is designed to give 3D prints a low-gloss, professional finish that reduces the visibility of layer lines and suits models where a subtle surface is desired. It is a 1.75 mm filament on a 1 kg spool that aims to balance fine detail and dependable feeding for hobbyists and small workshops alike.
Key Points

The filament has a matte texture that minimises shine and helps printed parts look smoother straight off the printer. According to the manufacturer, the diameter is produced with tight tolerances to maintain consistent extrusion and accurate layer deposition. Each spool is said to be carefully wound to avoid tangles and feeding interruptions that can ruin a long print. The material is vacuum-sealed after drying to reduce moisture uptake, which helps prevent bubbling or nozzle blockages during printing. Consider that matte PLA can sometimes show dust or finger marks more readily than glossier finishes.


Technical Specifications

- Name: ELEGOO Matte PLA Filament 1.75mm White 1KG
- Diameter: 1.75 mm
- Spool weight: 1 kg (2.2 lbs)
- Finish: Matte, low gloss
- Compatibility: Fits most common 1.75 mm FDM 3D printers
Benefits



The matte surface tones down reflections and can make post-processing like sanding and painting easier, because small imperfections are less apparent. Consistent diameter is useful when printing intricate parts that need dimensional accuracy, for example gears or snap-fit components where predictable tolerances matter. Vacuum-sealed packaging reduces the need for immediate drying, particularly if the spool will be stored for some time before use.
Usage Recommendations

For best results, dry the filament briefly if it has been stored in humid conditions despite the sealed packaging. Use common PLA print temperatures and moderate print speeds to preserve detail and avoid stringing. If you plan to paint or glue parts, lightly sanding the surface can improve adhesion because the matte finish accepts primers well. Monitor first layers closely to ensure good bed adhesion, especially with fine detail prints.
Products with discounts that might interest you
- ELEGOO PLA Filament 1.75mm Orange 1KG โ Precise, tangle-free and printer-friendly
- ELEGOO Rapid PLA Plus 1.75mm Black PLA+ 3D Printer Filament (4kg bundle)
- ANYCUBIC PLA Filament 1.75mm, 1kg Spool โ Accurate, Clean 3D Printing
- SUNLU Macaron PLA Meta 1.75mm filament
- eSUN PLA+ Filament 1.75mm (2 Spools) โ ePLA+HS High Speed 3D Printer Filament, 1KG per Spool, Grey
- YOOPAI Creality PETG Filament 1.75mm (1kg) for most FDM printers, transparent
- ELEGOO PLA Basic Refill Filament 1.75mm Bundle (4kg) โ Black, White, Red & Cobalt Blue
- Creality Space Pi filament dryer 80 W
- Anycubic PLA Filament 1.75mm (Black/White) โ Intelligent RFID Identification, 2 Pack 1kg
- Overture High Speed TPU Filament (95A) 1.75mm Flexible, Blackโclog-free, smooth prints for FDM
- 3DHoJor PLA Pro 1.75mm Filament (Light Blue) โ 1kg cardboard spool, vacuum sealed for most FDM printers
- SUNLU PLA+ 2.0 Filament 1.75mm (Lavender Purple) โ stronger, less brittle PLA+ upgrade
- TECBEARS PLA 3D Printer Filament (1.75mm) โ Neatly Wound, 4KG Bundle, Black
- Zeberoxyz 2pcs Heated Bed Insulation Mats (foil-backed foam) for 3D printer hotbed
- ELEGOO Rapid PLA Plus Filament Bundle (1.75mm) โ White, 4kg total
- Creality Official Space PI Filament Dryer for 1kg spools (built-in fan, 110W PTC heater, one-key presets)
- ELEGOO Matte PLA Filament Bundle 4KG (1.75mm) for 3D Printers
- TINMORRY PLA 1.75mm Matte Red 1kg spool for Bambu Lab FDM printers
- DEEPLEE PLA Basic 1.75mm 3D Printer Filament Bundle (Black/White/Brown) โ 3kg, vacuum-packed
- SUNLU PLA+ 2.0 Filament (1.75mm, Midnight Black) โ 1kg spool with improved strength
- Flashforge ABS Pro Filament 1.75mm Black
- ANYCUBIC Screen Protectors for Photon Mono M7/M7 Pro โ 5 Pack
- Anycubic PLA+ 1.75mm 3D Printer Filament (PLA Plus) โ High Toughness, Black, 1kg spool
- SUNLU PLA+ 3D Printer Filament (1.75mm, 1kg, Black) โ Upgraded Tough PLA Plus



