TP‑Link POE160S PoE+ Injector 30W

At a glance

The TP‑Link POE160S turns a non‑PoE switch or device into a powered network endpoint, supplying data and power over a single Ethernet cable. It provides up to 30W to compatible devices, making it a practical choice when you need to deploy an access point, IP camera or IP phone where mains power is not available.

Tech specs

• Name: TP‑Link POE160S PoE+ Injector
• Type: PoE+ injector
• Format: 2× Gigabit ports
• Capacity: Supplies up to 30W
• Distance: Up to 100m
• Protocol: IEEE 802.3af/at

Benefits

This injector is straightforward to fit, with plug and play setup and wall or desktop mounting options. The gigabit input and output ports preserve wired throughput while adding power to the line, so you do not need to replace an existing switch. Auto detect ensures the unit negotiates correctly with 802.3at and 802.3af devices, and backwards compatibility covers older PoE kit. Note that it does not support passive PoE, so check your device standard before buying.

Best use cases

You’ll like it if you need to power a single device at a distance from mains power, for example an outdoor or ceiling‑mounted IP camera, a wireless access point in a hall or a VoIP handset in an office corner. It makes sense if you want a low‑cost way to extend PoE to one or two devices without rewiring.

Care & maintenance

Keep the injector in a ventilated spot and avoid prolonged exposure to damp or extreme heat. Unplug power before cleaning. Regularly inspect cables and connectors for wear to maintain reliable operation.

What’s included

The pack includes the TP‑Link POE160S injector and a power adaptor as supplied by the manufacturer.