monTEK 1.1" Ultra Slim Full Motion TV Wall Bracket (37–75 inch, up to 60kg, max VESA 400x400)
Product description
The essentials
If you want your TV to sit almost flush to the wall, monTEK’s ultra slim wall bracket is designed around that idea. It retracts to 1.1" from the wall, while still offering full-motion adjustments for tilting and swiving. On paper, it’s aimed at people who care about a tidy living-room look (less visual bulk) but don’t want to give up convenience when positioning the screen.
This is a heavy-duty, articulated wall mount intended for TVs between 37" and 75" and up to 60kg. The practical takeaway is simple: for the right VESA pattern and wall type, it gives you flexibility for glare control and for getting the viewing angle right—without needing to “live with” a fixed, awkward TV position.
What matters most for buying
The first thing to check is compatibility. The bracket supports VESA patterns from 100x200mm up to 400x400mm and is described as suitable for TVs in the 37"–75" range. If your TV’s VESA sizing sits outside that window, this won’t be the one.
Next, consider wall mounting requirements. This bracket is designed for concrete, brick walls, and 16"/18" wood studs. It also comes with a clear warning: don’t install the swivel TV wall bracket on drywall alone. If you’re working with plasterboard only, you’ll need a different installation approach or professional guidance—because “it might hold” isn’t good enough for a 60kg-rated mounting job.
Key features you’ll notice day to day
Where this mount feels different is in the combination of ultra slim design and motion.
You get a tilt of +3°/-12° to help reduce glare, with adjustment after installation of +/-3° for fine-tuning. It can extend up to 16.5" from the wall and swivel +/-60° for angled viewing. There’s also a note that the maximum swivel angle can depend on screen size, so don’t be surprised if your TV doesn’t swivel quite as far as the spec implies.
One more small detail that helps in real rooms: the inclusion of a velcro cable management piece. It won’t magically make cabling disappear, but it can help keep things neat instead of turning into a visible tangle.
Usage tips
A good way to think about this bracket is: it’s built for everyday positioning rather than “set it once and forget it.” When you mount a TV in a corner, opposite a seating area, or in a room with shifting light, the tilt and swivel range can make a noticeable difference.
For example, imagine a living room where afternoon sunlight creates reflections on the screen. With this mount’s tilt, you can aim the TV slightly to reduce glare, then use the small post-install level adjustment to keep the image straight.
Also consider cable planning. Because the bracket can move (extend and swivel), leaving cables with enough slack and routing them cleanly behind the TV matters more than you might expect.
Technical details (quick specs)
- Type: Full motion TV wall mount (ultra slim retractable bracket)
- TV size range: 37"–75"
- Maximum load: up to 60kg
- Maximum VESA: 400x400mm
- Supported VESA range: 100x200mm to 400x400mm
- Wall-to-TV when retracted: 1.1"
- Extension from wall: up to 16.5"
- Tilt range: +3° / -12°
- Swivel range: +/-60° (maximum swivel angle depends on screen size)
- Post-install level adjustment: +/-3°
Where it shines, and where it may fall short
This is a strong fit if you want a tidy, near-flush TV setup and you also want the ability to angle the screen for glare and viewing positions. The heavy-duty steel construction and the stated up-to-60kg support make it feel more serious than the thinner, purely basic wall mounts.
That said, it may not be the best choice if your wall is drywall only, or if you can’t confirm your TV’s VESA pattern is within 100x200mm–400x400mm. Also, because it’s a full-motion setup with moving parts, installation accuracy and cable slack matter—if you rush the fitting, you’ll feel the difference.
Should you buy it?
It makes sense if you’re installing a 37"–75" TV (up to 60kg), have a compatible VESA pattern up to 400x400mm, and your wall type is concrete, brick, or suitable wood studs. The ultra slim 1.1" retraction is a real selling point for rooms where you don’t want the TV sitting “on the wall” like an add-on.
You may want to skip it if you’re relying on drywall alone, or if your TV’s VESA spec doesn’t match what this bracket supports. If you’re after something purely fixed with minimal movement, this could be more complexity than you need.
Mini FAQ
Will this work with OLED and LED/LCD TVs? The description says it fits 37"–75" LCD/LED/OLED TVs, as long as the VESA pattern is within 100x200mm–400x400mm.
How close does the TV sit to the wall? When retracted, it’s designed to sit at 1.1" from the wall.
Can I install it on drywall? No—there’s a specific warning not to install the swivel TV wall bracket on drywall alone.
Does swivel always reach the full +/-60°? The maximum swivel angle depends on screen size, so it may vary in practice.
Is the bracket designed to reduce glare? Yes, it offers a tilt of +3°/-12° aimed at helping with glare, plus post-install level adjustment.