GEARit Cat6 Ethernet Cable 200ft (Outdoor Direct Burial, 24AWG, RJ45, UV-Resistant Jacket)
Product description
What it is and why people buy it
If you need an Ethernet link outside and you don’t want to baby the cable run, this GEARit Cat6 direct burial cable is built for that job. It’s designed to go underground for outdoor router setups, backyard offices, and other permanent or temporary outdoor installations where weather and harsh conditions can be part of the story.
On paper, the pitch is pretty clear: a Cat6 cable rated up to 10Gbps and 550 MHz, with a jacket meant for direct burial. That combination can make installation feel simpler than dealing with exposed cabling, cable channels, or extra protective gear—especially if your goal is “dig, bury, connect,” and move on.
The key details that actually matter
The cable uses four twisted pairs and copper clad aluminum (CCA) conductors. That’s a common “value-forward” approach: it’s meant to deliver Cat6 performance without pushing you into the highest-cost cable category.
A second practical detail is the jacket. It’s described as LLDPE (PE) UV-resistant and waterproof, and specifically rated for direct burial. In real terms, that’s the kind of wording you want when the cable has to live outdoors.
Then there are the RJ45 connectors with PVC “bubble boot” covers. Those boots are there to protect the locking area from wear and tear and to make disconnecting easier with a thumb press. For anyone installing for a project that might change later (new router location, temporary outdoor setup, or a backyard office build-out), that small convenience can matter.
One limitation to keep in mind: the product is clearly positioned for outdoor/direct-burial use. If you’re looking for something you’ll regularly re-route, yank, and re-terminate indoors, you may not need the same outdoor-focused jacket.
Key points for performance expectations (and where it can fall short)
GEARit states Cat6 speeds “up to 10Gbps” and 550 MHz. That’s the spec-level headline. The honest buying angle is that real-world speeds still depend on your network equipment and how your run is handled. The cable can be capable, but your router/switch and overall setup need to support the same performance target.
Also, since the conductors are copper clad aluminum (CCA), it’s a budget-minded choice rather than a “no compromises” copper-only build. If you’re planning a high-end, long-run installation where you want to squeeze every last bit of margin, you may prefer to compare other cable constructions. This one is more “solid, value-driven outdoor Cat6” than “premium lab-grade.”
How it fits into your installation (practical use example)
Imagine you’re moving your router to a backyard office and want Ethernet to stay hidden. With this direct burial Cat6 cable, the workflow is basically:
- Dig a trench where you want the run.
- Lay the cable underground.
- Connect the RJ45 ends to your outdoor router and your indoor network equipment.
Because it’s described as easy to install without needing conduits or extra gear, the setup feels aimed at homeowners and contractors who want to avoid a more complicated pathway. The bubble boots also help if you need to detach the cable later without fighting the connector.
Who it suits (and who should rethink it)
It’s a strong match if you want an outdoor-ready Ethernet cable that can stay underground, while still targeting Cat6-class performance for your router, backyard office, or other exterior network connection.
It may not be your best choice if you: - Need a lot of frequent reconfiguration and re-termination. Outdoor/direct-burial builds are convenient, but they’re not meant for constant changes. - Are chasing the most conservative signal-margin option available. With CCA conductors, you’re shopping for value and “good enough for typical deployments,” not necessarily the most headroom.
What to double-check before buying
Before you commit to a 200ft run, it’s worth thinking through your routing and endpoint locations. A cable length that’s too short can force messy splicing or awkward reroutes, while an overly long run can add slack you’ll still need to manage underground.
Also, make sure your router and the rest of your wired network gear can actually support the performance level you care about. The cable is rated up to 10Gbps/550 MHz, but the rest of the system has to play along.
Is it worth it?
This GEARit Cat6 outdoor direct burial cable looks worth considering if you’re setting up Ethernet outdoors and you want a cable intended for direct burial with a UV-resistant, waterproof jacket—plus connectors designed to be easier to detach. The 200ft length is particularly convenient when your outdoor router or work area isn’t right next to the indoor network gear.
You may want to skip it if you don’t actually need direct burial, or if your plan involves lots of re-routing and termination changes. And if you’re the type who wants maximum signal margin regardless of cost, you’ll likely want to compare different conductor constructions.
In short: it’s a practical, installation-friendly Cat6 cable for outdoor runs, not a specialized “only buy this if you’re building a studio-grade network” product.
Mini FAQ
Will this cable work for an outdoor router connection?
It’s specifically marketed as a direct burial outdoor Cat6 cable for outdoor router and outdoor network installations, so it’s aimed at that exact scenario.
Does the jacket claim UV resistance and waterproof protection?
Yes—GEARit describes the jacket as UV-resistant and waterproof, and rated for direct burial.
What does the “bubble boot” do?
The bubble boots are PVC covers for the RJ45 connectors. They’re intended to protect the locking connector area and make the cable easier to detach.
What performance should I expect?
GEARit lists Cat6 speeds up to 10Gbps and 550 MHz. Your real throughput will still depend on your network equipment and installation conditions.
Is copper clad aluminum (CCA) a concern?
It’s a value-focused conductor approach. If you’re optimizing for maximum headroom, it’s worth comparing options—but for many typical outdoor Ethernet runs, the stated Cat6 ratings are the key reference point.