GRIFEMA GB2001-2 Dual Monitor Arm for 13–32 inch screens (VESA 75/100, up to 9kg each)
Product description
If your desk feels cramped, a dual monitor arm can be a proper space-saver—especially when you can mount it without relying on a bulky base. The GRIFEMA GB2001-2 is designed for two 13–32 inch LCD/LED screens and focuses on flexible positioning: height adjustment, full 360° rotation, and tilt/swivel for more natural viewing angles.
It’s the kind of setup that works well for office desks and home workstations where you want clean ergonomics rather than two monitors sitting on stands. That said, “universal” only goes so far—your VESA pattern and monitor weight still have to match the spec, otherwise it won’t sit safely.
The essentials
This is a dual monitor desk mount arm system intended to hold two screens within the 13–32 inch range. Each arm supports up to 9kg, and it’s built around VESA 75x75mm and 100x100mm mounting holes (so you need your monitors to offer one of those patterns). The arms also reach up to an extension length of 420mm, which is handy if your monitors need to sit forward for a comfortable line of sight.
You get two installation routes: a C-clamp clamp-through approach or a grommet mounting method. The desktop thickness it’s meant to suit is up to 80mm, which covers a lot of common desks. The manufacturer also claims the setup can be completed in about 10 minutes, assuming you have the tools and the mounting surface is suitable.
What you’ll notice in day-to-day use
The whole point of a monitor arm is how quickly you can fine-tune your posture. With the GB2001-2, you can adjust height, then rotate 360°, tilt up/down by ±90°, and swivel left/right by ±90°. On paper, that gives you a lot of freedom—so whether you’re switching between documents, spreadsheets, or reading at a slightly different angle, it’s not a “set it and forget it” situation.
There’s also an interesting detail: each arm has 3 pivot points. In practice, that kind of multi-joint movement is what helps the display stay controllable across different perspectives, rather than feeling like the monitor swings out and then stops behaving.
A small real-life example: if you’re doing long Zoom calls or writing with a keyboard slightly to the side, you can rotate and swivel one display to sit squarely in your sightline, instead of twisting your chair body all afternoon.
Key points for compatibility (and the one thing to double-check)
It’s easy to get excited by the screen-size headline, but the fit depends on a couple of specific constraints:
- VESA: You need 75x75mm or 100x100mm holes on each monitor.
- Weight: Each arm is rated to support a maximum load of 9kg per monitor.
- Desk thickness: The mounting methods are intended for desktops up to 80mm thick.
It may be a “universal size” arm for 13–32 inch screens, but if either monitor sits outside the weight limit or doesn’t match the VESA pattern, it won’t be a safe bet. That’s the main limitation to keep in mind.
Where it makes sense (and who it suits)
This is a strong match if you want to free up desk space and tidy up your workstation. The design is specifically positioned as a space-saver compared to a vertical monitor stand with a heavy-duty base, because the C-clamp or grommet mounting removes the need for a large footprint on the desk.
It also suits people who like their setup to be flexible: students, desk workers, and anyone who alternates between reading and active typing. If you tend to keep a larger keyboard and mouse pad, moving the monitors off the desk surface can help reduce clutter and give you more room for hands-on work.
Tech specs (the practical bits)
- Screen size range: 13–32 inch (for two monitors)
- Maximum load: 9kg per monitor arm
- VESA compatibility: 75x75mm and 100x100mm
- Movement range: rotate 360°, tilt ±90°, swivel ±90°
- Arm design: 3 pivot points per arm
- Extension length: maximum 420mm
Pros and limitations to consider
What stands out: the combination of dual-arm support, broad movement (360° rotation plus substantial tilt and swivel), and desk-space saving via C-clamp or grommet mounting. The system also uses high-strength steel construction with an anti-scratch surface, which is reassuring for everyday use.
Where it can fall short: if your monitors don’t match the VESA sizes or exceed the 9kg limit, the flexibility doesn’t matter—fit and safety come first. Also, while the extension length and multi-pivot design suggest stable viewing angles across perspectives, any arm setup can feel different depending on desk materials and how you position the monitors.
Is it worth it?
Choose the GRIFEMA GB2001-2 if you have two monitors that are 13–32 inch, fit VESA 75x75 or 100x100, and stay within the 9kg limit per arm. It’s a sensible buy when desk space is tight and you want to adjust height and angles quickly for reading or general work without relying on bulky stands.
Skip it if one of your monitors doesn’t match the VESA pattern, or you’re near/over the stated weight limit. In those cases, you’ll be better off looking for an alternative arm that’s compatible with your monitors rather than focusing only on movement ranges.
Mini FAQ
Will this fit any 13–32 inch monitors?
Not automatically. You still need the monitors to match the VESA pattern (75x75mm or 100x100mm) and to be within the 9kg maximum load per arm.
How is it attached to the desk?
It supports two methods: C-clamp mounting and grommet mounting. It’s intended for desktop thicknesses up to 80mm.
Does the arm allow different viewing angles?
Yes. The movement includes height adjustment plus 360° rotation, tilt up/down by ±90°, and swivel left/right by ±90°.
How long does setup take?
The product information states the setup can be completed in about 10 minutes, assuming the mounting surface and tools are all in order.