2PCS 3-Port 12V RV USB Outlet (90W) with Dual PD3.0 Type‑C 72W + USB‑A QC3.0 18W, Panel Wall Mount Charger Adapter

If you’re charging multiple gadgets while you’re away from mains, a 12V panel USB outlet is one of those “why didn’t I do this sooner?” upgrades. This 2PCS 3‑port 12V RV USB outlet is built around two USB‑C PD3.0 ports plus one USB‑A QC3.0 port, designed to run from a 12–24V input and charge up to three devices at once.

On paper, it’s aiming at the everyday travel kit: phones, tablets, GPS, dash cams and similar bits that normally compete for one single charger. The headline is total output up to 90W, with dual Type‑C PD3.0 offering up to 72W combined and a QC3.0 USB‑A port rated up to 18W.

That said, it’s not a universal “anything, any speed” solution—charging speed will depend on what your devices can accept, and how many ports you’re using at the same time. If you need maximum PD output all the time on one device, you’ll want to think about how you’re splitting usage between ports.

The essentials at a glance

You get a compact, panel-style 3‑port USB outlet intended for 12V setups such as RVs, boats, campers and similar automotive-style applications. It includes:

• Two USB‑C PD3.0 ports (the listing states up to 72W total across the two)
• One USB‑A QC3.0 port (up to 18W)
• A total claimed output of up to 90W
• A blue LED indicator and an on/off switch intended to help prevent battery drain from constantly lit LEDs
• A flip-top dust cover to help keep out water droplets, dust and moisture

It’s a practical “mount and plug in” charger rather than something you’d toss in a bag. The installation notes suggest you only need a small hole for the wires, and the outlet is designed for surface mounting (so you’re not dealing with a huge cut-out).

Where it shines in real use

The biggest win is obvious: three ports means less charger juggling when you’re on the move. Imagine arriving at a stop, plugging in your phone on one USB‑C PD port for faster charging, top-up a second device on the other USB‑C, and keeping a third gadget (often something older that won’t take PD) on the USB‑A QC3.0 port.

The listing also frames the PD3.0 side as “dual 36W” per Type‑C port (with 72W total across both) and provides output step examples like 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 18V/1.5A, and 20V/1.5A for USB‑C, with USB‑A output states including 5V/3A, 9V/2A, and 12V/1.5A (18W max). Whether you’ll see those exact rates depends on your device.

For battery-friendly practicality, the non-slip push-button switch is specifically positioned as a way to avoid draining power when you’re not charging. The listing also notes the switch is off by default, and the cover is designed for easier connect/disconnect than typical spring-loaded designs.

Key takeaways on power, compatibility and limits

Power delivery is the heart of this unit, and it’s also where you should set expectations.

• Total power is claimed up to 90W. In practice, if you’re charging multiple devices at once, the available power has to be shared.
• The USB‑C PD3.0 ports are the likely “fast lane” for modern phones/tablets that support PD.
• The USB‑A QC3.0 port offers quick charging for compatible devices, and the listing says it’s backwards compatible with all Quick Charge versions.

One limitation to keep in mind: the listing talks about recommended usage away from water and harsh weather conditions, even though there’s a dust cover. So if you’re installing somewhere exposed to heavy spray or severe conditions, you may want to think carefully about placement and how well protected the area really is.

Also, even though the listing mentions lots of device examples, the only thing you can truly trust is whether your device supports PD3.0 over USB‑C and/or QC over USB‑A. If it doesn’t, you’ll still get charging, just potentially at a lower speed.

Tech specs

• Name: 2PCS 3 Ports 12V RV USB Outlet 90W Dual PD3.0 Type‑C + USB‑A QC3.0 Panel Wall Mount
• Type: 12V USB outlet / panel charger adapter
• Input voltage: 12–24V
• Total power: up to 90W
• USB‑C (PD3.0) output: 5V=3A, 9V=3A, 12V=2.5A, 15V=2A, 18V=1.5A, 20V=1.5A (USB‑C 36W max per port stated, 72W total stated)
• USB‑A (QC3.0) output: 5V=3A, 9V=2A, 12V=1.5A (18W max)
• Charging ports: 2 × USB‑C PD3.0 + 1 × USB‑A QC3.0
• Features: on/off switch with anti-slip push-button, blue LED indicator, flip-top dust cover

What’s included and installation notes

This listing is for a 2PCS pack, so you’re getting two outlets. Beyond that, the entry focuses on installation method rather than listing exact contents like cables or mounting hardware beyond screws being referenced.

For wiring, the notes say the black wire connects to the negative pole and the red wire connects to the positive pole. The process is described as: pass the wires through a small hole, tighten the screws, then cover the lid. The aim is to protect the outlet from water, dust and moisture.

A practical tip before you buy: measure your intended mounting spot and check you’re comfortable with surface mounting and small-hole wiring. If you need a no-drill or snap-in solution, this may not suit your setup.

Pros

• Three ports for simultaneous charging rather than one-at-a-time
• Dual USB‑C PD3.0 emphasis (72W total stated) for faster charging on PD-capable devices
• USB‑A QC3.0 port included (18W max stated) for older or non‑USB‑C accessories
• On/off switch and LED indicator intended to help reduce unwanted battery drain
• Flip-top dust cover designed to keep out droplets and dust and also make plugging/unplugging easier
• Built-in protections mentioned (over-voltage, over-heating, over-load, short-circuit)

Should you buy it?

It’s a solid buy if you regularly travel with multiple devices and want a dedicated 12V panel charger that can handle fast charging over both USB‑C PD3.0 and USB‑A QC3.0. If your RV/boat/camper setup already runs on 12–24V and you prefer mounting once and living with it, this kind of 2PCS kit can be good value—especially when you want fewer compromises between ports.

You may want to skip it if your devices mostly charge slowly anyway, or if you only ever need one port and would rather use a simpler single-output charger. It might not be a great match if you’re installing in a location with heavy exposure to water and harsh weather, because the guidance suggests keeping it away from harsh conditions even with the cover.

Mini FAQ

Is this charger meant for RVs and boats, or general car use? The listing explicitly frames it for RVs, boats, campers and similar automotive-style situations, using a 12–24V input.

Can it charge three devices at the same time? Yes—the listing states it’s designed for simultaneous charging of three devices.

Will I get the full 90W output? The listing claims up to 90W total. In real life, that depends on how many devices are connected and what each device can draw (supported charging profiles).

Does it drain the battery when you’re not using it? The presence of an on/off switch (with the note that the switch is off by default) is there to help prevent drain from continuously lit LEDs.

Is the dust cover fully weatherproof? It’s designed to help block water droplets and dust, but the listing also recommends indoor automotive use away from water and harsh weather conditions, so placement still matters.