xyaudio XLR microphone cable, 20 ft

If you need one cable for a simple microphone connection, a two-pack may be more than you need, if you’re wiring separate parts of a small recording or PA setup, having two leads can be useful. This xyaudio set is listed as two 20-foot, three-pin XLR cables with male-to-female connectors, so it’s aimed at connecting compatible audio gear across a room rather than keeping everything close together. The braided shielding and PVC jacket speak to practical everyday use, but the listing doesn’t establish how the cables perform in every setup. Without having tried it, I’d treat the noise-reduction and durability language as design claims, not a guarantee of results.

How to use it

Connect a microphone’s three-pin XLR output to an XLR input on a mixer, speaker, amplifier, or other compatible equipment. The male-to-female ends define the connection, so check that your gear has the corresponding XLR port before choosing this cable, a plug that looks similar won’t help if the connector type doesn’t match. A practical setup might be a microphone at one end of a room and a mixer on a table at the other, with the cable routed along the floor. The listed length is measured from connector to connector, which is useful to know when estimating reach.

The conductors are described as oxygen-free copper, with high-density braided shielding intended to help reduce electromagnetic and radio-frequency interference. Gold-plated pins and reinforced heat-shrink tubing around the solder joints are also listed. Would those details matter more than simply having a spare lead? For a setup that gets plugged in and packed away regularly, connector security and a second cable may be more relevant than decorative extras. The listing says the connectors are designed for over 10,000 connection cycles, though that figure isn’t an independent performance test.

Pros

• Two cables provide a spare or let you connect two compatible pieces of audio gear at once.
• The standard three-pin XLR male-to-female format suits compatible microphones, mixers, speakers, PA systems, and studio equipment.
• Braided shielding and a PVC jacket are practical design choices for home recording or live sound use.
• The listing describes the connectors as having a smooth locking action, with reinforced protection at the solder joints.

You’ll appreciate it if you want a pair of matching XLR leads for microphones, a home studio, or a PA setup and can use the full 20-foot reach. It’s not for you if your equipment needs a different connector, or if you only need a short cable for gear positioned side by side. A single shorter lead may be a tidier choice for a compact desk.

Spec sheet

• Type: Balanced XLR microphone cable
• Format: Two-pack
• Length: 20 ft per cable, measured connector to connector
• Connectors: Three-pin male to female
• Conductors: Oxygen-free copper
• Shielding: High-density braided shielding
• Jacket: PVC
• Connector pins: 24K gold-plated

Should you buy it?

This set makes sense when you need two 20-foot XLR runs for compatible equipment, or want a spare ready for a recording or live-sound setup. The combination of braided shielding, a PVC jacket, and locking connectors fits that practical use better than a short lead intended only for a close desk connection. The trade-off is that the listing doesn’t provide detailed measurements for cable thickness or flexibility, and the noise-control claims can’t guarantee a silent signal in every environment. Choose it for the connector format and reach you need, skip it if your setup calls for a different plug or substantially shorter cables.