ELIVED Tilting TV Wall Mount (YD1038) for 37"–85" TVs up to 132 lbs, Low Profile Tilt Mount, Max VESA 600×400mm
Product description
What it is and why people buy it
An ELIVED tilting TV wall mount is built for one simple job: keep your TV securely on the wall while giving you a better viewing angle. This model is designed for many 37" to 85" TVs up to 132 lbs, with a listed VESA range up to 600x400mm. It also tilts down by up to 10 degrees, which is the kind of small adjustment that can make a noticeable difference in glare and comfort.
Where it gets interesting is the combination of “low profile” and “tilt.” A lot of wall mounts stick out more than you expect. Here, the mount is described as holding the TV about 1.5" flush to the wall, which helps the install look cleaner in a living room, bedroom, or office.
Key features you’ll actually feel day to day
The headline features on paper are straightforward, but they matter in real use.
First, the tilting action. The mount can tilt the screen down to 10 degrees. If you’ve ever had the TV positioned high or caught reflections from overhead lighting, that small downward angle can help you see more comfortably without constantly leaning.
Second, the low-profile look. With a slim profile (about 1.5" flush), the TV sits closer to the wall than many bulkier brackets. That can be a big deal if you’re aiming for a tidy setup and want fewer visual “gaps.”
Third, the install approach. It’s described as including necessary hardware and supporting 16"/18"/24" wood studs, plus concrete/brick wall mounting. A practical note: it specifically warns not to mount on drywall alone, so your plan needs proper stud or masonry backing.
Finally, the “quick lock & release” system. Instead of fiddly steps every time, it uses pull straps to auto-lock or release the TV from the wall plate. That’s a convenience feature, but it also means you’ll want to make sure the strap placement and visibility details are handled the way the instructions suggest (tie straps behind the TV if they’re too long).
Tech specs that matter before you commit
Tech specs
- Name: ELIVED Tilting TV Wall Mount (YD1038)
- Type: Tilting TV wall mount (low profile)
- TV size compatibility: Most 37" to 85" TVs
- Max weight capacity: Up to 132 lbs
- Max VESA compatibility: Up to 600x400mm
- VESA range: 100x100mm to 600x400mm
- Wood stud fit: Fits up to 24" wood studs (noted support for 16"/18"/24" stud spacing)
- Wall offset (low profile): Holds TV about 1.5" flush against the wall
- Tilt angle: Up to 10 degrees down
It’s worth saying plainly: the mount only helps if your TV’s weight and VESA pattern fall within these limits. If your TV is outside the stated range, no amount of “it looks close” will make it work safely.
Installation reality check (and the common gotchas)
On the surface, the mounting sounds simple: use the included hardware, align with the right stud spacing, and secure it. But the purchase decision often comes down to whether your wall and your TV setup cooperate.
You’ll want to double-check: - TV weight stays under the stated 132 lbs. - VESA pattern matches within 100x100mm to 600x400mm. - Stud spacing works with 16"/18"/24" wood stud support (and you’re actually mounting to studs). The product explicitly says not to mount on drywall alone. - Input/cable location on the back of your TV, because a wall mount can change how much room you have for ports and cable bends.
Also, this is a tilting mount but not an extreme one. If you need a big downward angle for a very high placement, 10 degrees may feel a bit limited. It’s a practical adjustment, not a full-on “mount for every ceiling height.”
Who it’s for (and who should think twice)
It suits you if you want a cleaner, low-profile wall look and you’d benefit from reducing glare without moving the TV constantly. You’ll probably appreciate it if you mount the screen higher than eye level, or if lighting reflections make watching less comfortable.
It may not be the best match if your TV setup demands a lot more tilt than 10 degrees, or if your wall situation doesn’t let you anchor properly (again: avoid drywall-only installs). If you’re unsure about stud spacing or masonry conditions, it’s worth pausing before you buy—this type of mount depends heavily on correct anchoring.
Worth considering if you value the “quick lock & release” convenience, especially when you need to position the TV carefully and want an easier mechanism for locking it back onto the plate.
Everyday use example
Imagine you mount your TV slightly higher on the wall in the living room. After installation, you notice the overhead light catches the screen. With this tilting mount, you can tilt the screen downward up to 10 degrees to cut reflections and bring the picture more into your normal line of sight. It’s a small change, but it often feels like the difference between squinting and actually enjoying the show.
Is it worth it?
This ELIVED tilting TV wall mount is a solid buy if your TV is within 37"–85", under 132 lbs, and uses a VESA pattern between 100x100mm and 600x400mm, and if you can mount into studs (16"/18"/24") or suitable concrete/brick. The low-profile 1.5" flush design plus the 10-degree tilt are a good combo for glare reduction and a cleaner look.
You may want to skip it if you’re missing the right VESA/weight/stud-match details, or if you’re planning a drywall-only install. And if your viewing setup needs more than a gentle tilt, it can feel a little constrained.
Quick FAQ
Quick FAQ
Q: Do I need to check my TV’s VESA before buying? Yes. The mount supports VESA patterns from 100x100mm to 600x400mm, so your TV’s VESA has to fall in that range.
Q: Can this mount go on drywall alone? No. The product instructions state not to mount on drywall alone.
Q: How much does the TV tilt? It’s listed as tilting down to 10 degrees.
Q: Is the mount low profile? It’s described as holding the TV about 1.5" flush against the wall, which is meant to keep the setup looking streamlined.
Q: What wall types are supported? It’s described as fitting 16"/18"/24" wood studs and can be used on concrete/brick walls (as long as you follow the mounting guidance).