Cooper-Atkins 1075 General Purpose Puncture Thermistor Probe, 3.75-Inch Shaft
Product description
Key features
For a temperature check that needs to reach into a material, the Cooper-Atkins 1075 is a general-purpose puncture thermistor probe with a 3.75-inch shaft. It measures by insertion or immersion, so the same probe can suit tasks involving either a material that can be penetrated or a liquid sample. Its thermistor sensor covers a stated range of -40° to 300°F (-40° to 149°C).
The polyurethane-coated coiled cable is part of the probe’s design, and the puncture format gives it a clear role in general-purpose temperature measurement. If your work calls for insertion, this is a direct match for that method, if the measurement is taken by immersion, that method is supported as well. It offers a practical alternative to choosing a probe intended for only one of these approaches.
Buyer feedback highlights perceived accuracy and functionality. Some buyers also report using it with VWR 100A handheld thermometers, those comments reflect individual experiences rather than a specification of compatibility.
Tips for day-to-day use
Choose insertion when the measurement calls for placing the probe into the material, or immersion when checking a liquid. Keep the intended method and the probe’s stated temperature range in mind when selecting it for a task. The 3.75-inch shaft length is a useful detail to consider when deciding whether this puncture format suits the material or sample you need to measure.
For example, a general-purpose measurement task may involve taking a reading from a material by insertion, while a liquid sample may call for immersion. This probe is designed for both methods, making it relevant when those different measurement needs arise in the same work setting. Its thermistor sensor and listed temperature range help define the kinds of readings for which it is specified.
How to use it


Use the probe by insertion or immersion, according to the material being measured and the task at hand. Position the shaft in the material or liquid for the chosen method, then use it as a temperature probe with a suitable measuring setup. The product is described for general-purpose use, so its central value is flexibility between these two measurement methods rather than a single narrowly defined application.
Before selecting it for a particular measurement, compare the task’s expected temperature with the stated range of -40° to 300°F (-40° to 149°C). The 3.75-inch shaft length can also help you judge whether this probe format is appropriate for the measurement point you need to reach.
Before you decide
What measurement methods does the probe support? It is designed to measure temperature by insertion or immersion, making it suitable for tasks involving a material or a liquid sample.
What temperature range is listed? The stated range is -40° to 300°F (-40° to 149°C).
What type of sensor does it use? It uses a thermistor sensor for temperature measurement.
Is it worth it?
The Cooper-Atkins 1075 is a focused choice for general-purpose temperature checks where insertion or immersion is the required method. Its 3.75-inch shaft, thermistor sensor and stated temperature range give you concrete details to match against the task, while support for both insertion and immersion adds useful flexibility. Choose it when those measurement methods fit your work and you want a puncture-style probe for the job.
Products with discounts that might interest you
- Digital Brix Refractometer 0–35%
- ANYCUBIC Wash and Cure Station 3.0 Plus
- ANYCUBIC Wash and Cure Station 4 L
- ANYCUBIC Wash and Cure Station 3.0
- General Tools & Instruments Plastic Metric Dial Caliper 144MM
- TOPDON thermal imaging camera with 3.5-inch display
- WINTERS PEM135 Pressure Gauge, 2-Inch Dial, 30 inHg Vacuum/kPa, 1/4-Inch NPT
- AstroAI Clamp Meter 2000 Counts
- Pawfly 5 in 1 Water Tester for pH, Salinity, TDS, EC and Temperature
- CREWORKS 15L Ultrasonic Cleaner with Heater, Timer and Digital Controls
- CREWORKS Ultrasonic Cleaner 30L
- Visual Fault Locator 50 km
- Jeanoko Handheld Food Salinity Tester, LED Display, 0.3%–2.0% Range
- Aphbrada Acrylic Dispenser
- NICE-POWER R-SPS2005 Variable DC Bench Power Supply, 200V, 5A, 1000W
- JINXUAN W-Balance-S-3kg-0.01g Digital Lab Scale, 3000 g Capacity
- NANKADF 0-120V 0-3A Bench Power Supply with Encoder and USB-A/USB-C
- Anycubic PLA+ 3D printer filament, 2 kg spool
- CKANDAY 8541888353 Graduated Liquid Droppers, 5 mL, 7 Colours, 10-Pack
- Clear Choice Labs Reconstitution Solution, 2-Pack of 10 mL Glass Vials, Triple-Sealed (RUO)
- Generic Reconstitution Solution, 30 mL, 2-Pack, Triple-Sealed Glass Vials
- Genneric OPTICAL01 Fibre Optic Power Meter, Seven Wavelengths, -70 to +10 dBm
- HHIP 4400-0025 Dial Indicator Set with Magnetic Back, 2" Dial Face
- Jentatnua 3 Pack 10ml Solution, Triple-Sealed Borosilicate Glass
