Jeanoko Handheld Food Salinity Tester, LED Display, 0.3%–2.0% Range
Reviews
Price
Product description
When adjusting a pot of soup or checking brine for a batch of pickled vegetables, the Jeanoko handheld salinity tester gives you a direct way to check salt concentration in food and liquids. Its LED panel uses a red indicator for the salinity reading and a green light for power, making the result easy to read once the display settles.
Choose a handheld meter when you want to check individual samples as you cook or prepare preserved foods, for broader conductivity testing, a general-purpose conductivity meter is a different tool. This tester is designed around food salinity and has a 0.3%–2.0% measuring range.

Tech specs


- Type: Handheld food salinity tester
- Measuring range: 0.3%–2.0%
- Applicable temperature: 60℃–80℃
- Display: LED, red indicates salt concentration and green indicates power
- Materials: ABS shell, copper testing top and stainless steel components
- Size: Approx. 212 x 24.8 x 15.4 mm
- Power: 4 x LR44 (AG13) button batteries, not included

The compact format suits quick checks at the counter or during food preparation. The stated temperature range is intended for warm samples such as soup, while the measurement range covers common salinity checks. You can use the tester with soup, brine, pickled vegetables, fermented bean curd and salted eggs.
Getting the most from it



For a useful reading, work with the sample between 60℃ and 80℃. The instructions specify a test time of 2–10 seconds, wait for the display to stabilize before reading the last illuminated red indicator. This gives you a consistent way to compare samples prepared at similar temperatures, rather than relying only on taste when adjusting a recipe or recording a salinity reference for a later batch.
The probe should sit at least 2 cm into the solution and at least 1 cm from the container wall. That spacing helps keep the measurement area clear of the vessel. The tester’s small handheld body is convenient for moving between a cooking pot and a separate sample without setting up a larger meter.

Usage tips


Check that the probe is clean before measuring. If it needs cleaning, use a neutral detergent, clean the probe again after testing. Keep the sample within the specified temperature range, insert the probe to the recommended depth, and allow the display to settle before noting the reading. These steps are especially practical when comparing brines or batches of preserved foods, where using the same approach each time makes readings easier to compare.

The green power light should come on when you press the ON switch. If it does not light, the instructions indicate that the batteries may need replacing. The tester uses four LR44 (AG13) button batteries, so have the correct type ready for operation.
Should you buy it?

This Jeanoko meter is suited to cooks and home food preservers who want a dedicated way to check salt concentration in warm liquids and prepared foods. Its LED indicators, compact handheld design and defined 0.3%–2.0% range make it a practical fit for checking soup, brine and pickled-food samples as part of a repeatable kitchen routine.
Products with discounts that might interest you
- Digital Brix Refractometer 0–35%
- ANYCUBIC Wash and Cure Station 3.0 Plus
- ANYCUBIC Wash and Cure Station 4 L
- ANYCUBIC Wash and Cure Station 3.0
- General Tools & Instruments Plastic Metric Dial Caliper 144MM
- TOPDON thermal imaging camera with 3.5-inch display
- WINTERS PEM135 Pressure Gauge, 2-Inch Dial, 30 inHg Vacuum/kPa, 1/4-Inch NPT
- AstroAI Clamp Meter 2000 Counts
- Pawfly 5 in 1 Water Tester for pH, Salinity, TDS, EC and Temperature
- CREWORKS 15L Ultrasonic Cleaner with Heater, Timer and Digital Controls
- CREWORKS Ultrasonic Cleaner 30L
- Visual Fault Locator 50 km
- Aphbrada Acrylic Dispenser
- NICE-POWER R-SPS2005 Variable DC Bench Power Supply, 200V, 5A, 1000W
- JINXUAN W-Balance-S-3kg-0.01g Digital Lab Scale, 3000 g Capacity
- Cooper-Atkins 1075 General Purpose Puncture Thermistor Probe, 3.75-Inch Shaft
- NANKADF 0-120V 0-3A Bench Power Supply with Encoder and USB-A/USB-C
- Anycubic PLA+ 3D printer filament, 2 kg spool
- NewZoll 10 mL Glass Dropper Bottles, Red-Yellow Gradient Travel Vials
- Niqoaao Solution 30ML 2 Pack Glass Vials, Triple-Sealed
- Njvial 5 mL Glass Vials, 30 Pack with Screw Caps and Scale
- PATIKIL Model 1 110 ml Plastic Squeeze Bottles, Graduated, 4-Pack
- Qimic G20M-10M Endoscope Camera, 2.4-inch IPS Screen, 1080p, IP67
- Ronyes Lifescience BLLTTZ Graduated Glass Cylinder Set, 5–100 ml

