Genneric OPTICAL01 Fibre Optic Power Meter, Seven Wavelengths, -70 to +10 dBm
Product description
As a handheld fibre optic power meter, the Genneric OPTICAL01 is made for checking optical networks during installation, operation and maintenance.
Its measurement range runs from -70 to +10 dBm, giving technicians a broad range for fibre power checks. The meter also displays linear mW and non-linear dBm readings on the same screen.

With seven wavelength selections and an FC/SC/ST universal port, it supports testing across a range of fibre connections. A backlight, automatic shut-off and user self-calibration add practical controls for field work.


Getting the most from it

Select the wavelength that matches the measurement task, then read the result in dBm or mW. The seven wavelength IDs are 850, 980, 1300, 1310, 1490, 1550 and 1625 nm. For technicians moving between fibre links that use different wavelengths, these options make the meter useful across more than a single wavelength-specific check. A task focused on only one wavelength may call for a simpler single-wavelength approach, this model is suited to work where several of its listed wavelength settings are useful.
The FC/SC/ST universal port supports testing with those connector types, making the unit applicable to CATV and telecommunications fibre work. Its handheld format is practical for taking readings at installation or maintenance locations. The backlight can be switched on or off, while automatic shut-off helps manage power use. User self-calibration provides an adjustment option for new users as well as technicians familiar with optical power measurements.



Spec sheet
- Type: Handheld optical fibre power meter
- Measurement range: -70 to +10 dBm
- Wavelength IDs: 850, 980, 1300, 1310, 1490, 1550 and 1625 nm
- Central wavelength: 650 nm ±10 nm
- Connector types: FC, SC and ST universal port
- Display: Linear mW and non-linear dBm readings on one screen
- Power: Battery-powered, battery not included
- Functions: User self-calibration, automatic shut-off and switchable backlight

Why it’s worth it


The OPTICAL01 brings a broad measurement range, multiple wavelength IDs and two reading formats into one handheld tool. Seeing mW and dBm together helps make readings accessible in the format needed for a fibre test, while the wavelength choices support varied installation and maintenance tasks. The connector options also make it suitable for work involving FC, SC or ST fibre connections, including CATV and telecommunications testing.

For a practical service call, a technician can use the meter to check optical power on a fibre link, select the relevant wavelength ID and read the result at the connection point. Its user-adjustable calibration and straightforward handheld design keep the focus on taking and interpreting measurements. It’s a good fit if your work involves fibre network checks and you want one meter with several wavelength settings rather than a tool dedicated to a single wavelength.
Should you buy it?

Choose the Genneric OPTICAL01 for handheld optical power testing across its seven listed wavelength IDs, with FC/SC/ST connector support and simultaneous mW and dBm display. It suits fibre installation, operation and maintenance tasks, as well as CATV and telecommunications testing. Battery power, a switchable backlight and automatic shut-off round out a practical set of features for taking readings where the network work is happening.
Products with discounts that might interest you
- Pawfly 5 in 1 Water Tester for pH, Salinity, TDS, EC and Temperature
- Qimic G20M-10M Endoscope Camera, 2.4-inch IPS Screen, 1080p, IP67
- Ronyes Lifescience BLLTTZ Graduated Glass Cylinder Set, 5–100 ml
- SKYBASIC 5M Industrial Endoscope Camera, 4.3-inch LCD, 8 LED Lights
- Stobeu ST-LD13 5 mL Pipette Dropper Set, 12 Colours with Cleaning Brush
- Tilswall W300 Infrared Thermometer with Probe, Adjustable Emissivity
- UNIWEIGH UN-CW-001 Calibration Weight Set, 1–60 g, 7 Pieces with Tweezers
- Utile 4016.0500.6 Erlenmeyer Flasks, 500 mL Borosilicate Glass, Set of 6
- VARIFY Water Hardness Test Kit, 150 Strips, 0–425 ppm Range
- WINTERS PEM135 Pressure Gauge, 2-Inch Dial, 30 inHg Vacuum/kPa, 1/4-Inch NPT
- TOPDON thermal imaging camera with 3.5-inch display
- ALLmeter ALL003 Digital Dial Indicator, 0–25.4 mm, 0.01 mm Resolution
- eSUN PLA 3D Printer Filament 1.75 mm
- Njvial 5 mL Glass Vials, 30 Pack with Screw Caps and Scale
- Njvial 36-Piece 20 mL Glass Vial Set with Graduated Scales
- MEASUREMAN MA113 Liquid-Filled Pressure Gauge, 0–60 psi/400 kPa, Stainless Steel
- Anycubic PETG filament 1.75 mm
- ELEGOO PLA+ 3D Printer Filament, 1.75 mm
- HHIP 4400-0025 Dial Indicator Set with Magnetic Back, 2" Dial Face
- NICE-POWER R-SPS2005 Variable DC Bench Power Supply, 200V, 5A, 1000W
- JINXUAN W-Balance-S-3kg-0.01g Digital Lab Scale, 3000 g Capacity
- MOESAPU BH-W01 3-in-1 EMF Meter with EF, MF and RF Detection
- Cooper-Atkins 1075 General Purpose Puncture Thermistor Probe, 3.75-Inch Shaft
- NANKADF 0-120V 0-3A Bench Power Supply with Encoder and USB-A/USB-C

