Veise Single-Cylinder Deadbolt, Matte Black
Product description
A front, back, or garage door that needs a keyed lock can be frustrating to shop for when the existing holes and door thickness limit your choices. This Veise single-cylinder deadbolt pairs an exterior key cylinder with an inside thumb turn and fits a stated range of common door measurements, so you can compare its dimensions with your door before committing.
It has a matte black finish and is designed for interior or exterior doors.
How it fits
The lock is intended for front, back, garage, and office doors. It fits doors from 1-3/8" to 1-3/4" thick, with an adjustable backset of 2-3/8" or 2-3/4". The listed door hole is 2-1/8", and the faceplate base diameter is 2.56". These measurements matter more than the finish: if your current door preparation differs, the lock may not be a straightforward replacement.
For a typical installation, match the door thickness, hole, and backset to the listed dimensions, then use the included mounting hardware and illustrated instructions. The maker describes installation as a 10-minute job, according to the maker, actual work can depend on how closely your door matches the required fit. The package includes two keys, and the left/right reversible design gives flexibility for different door orientations.
Pros
The keyed exterior and inside thumb turn offer a familiar way to lock and unlock without needing a key from inside. Its brass cylinder and stainless steel lock body are practical material details, while the product listing also specifies ANSI Grade 3 certification and anti-bump and anti-pick protection. The name additionally identifies it as an anti-drill lock. The stated cycle testing is 250,000+ open-close cycles, a useful durability detail to weigh alongside the fit and security level.
What matters more for your door: a finish that matches the hardware, or a lock you can rekey later? This model cannot be rekeyed, which is a concrete tradeoff if you expect to change keys or want to match it to other locks. You’ll appreciate it if you want a keyed deadbolt with an inside thumb turn and your door matches the listed dimensions. It’s not for you if rekeying is a requirement, a rekeyable alternative would suit that preference better.
Spec sheet
- Type: Single-cylinder deadbolt
- Color: Matte black
- Security rating: ANSI Grade 3
- Door thickness: 1-3/8" to 1-3/4"
- Adjustable backset: 2-3/8" or 2-3/4"
- Door hole: 2-1/8"
- Faceplate base diameter: 2.56"
- Included: Two keys, mounting hardware, illustrated instructions
- Warranty: 1-year limited warranty, with a free 1-year extension after product registration
Final verdict
This is worth considering as a measured replacement for an interior or exterior door when you want a conventional keyed deadbolt, a matte black finish, and an inside thumb turn. Its stated fit dimensions and included hardware make the installation plan easier to assess before purchase. The main reason to pass is the non-rekeyable cylinder, especially if you manage several locks with one key or anticipate changing access. If your door dimensions match and that limitation is acceptable, the listed Grade 3 rating and security features make it a more substantial choice than simply selecting a lock by appearance, for a higher-security setup, compare products against the specific requirements of your door rather than assuming this rating covers every need.