Nilight 4 Inch Round Trailer Tail Light 24LED 🚚

This round trailer reverse light from Nilight brings a compact, bright backup solution for trucks, vans and trailers, improving rear visibility when reversing or signaling. With a stainless steel chrome bezel and a white 24-LED array, it combines visible illumination and weather resistance for utility vehicles and marine applications.

Key Points

The lamp uses 24 SMD 2835 LEDs to produce a bright white output that makes changes in braking or reversing easier to notice for drivers behind. The housing pairs an impact-resistant AS lens with an ABS bottom shell and a stainless steel chrome bezel for added protection and a tidy appearance. According to the manufacturer the assembly is IP65 rated for waterproofing so it can withstand rain and splashes on work sites or boats. Installation is straightforward, with three screws and nuts included and a surface-mount hole dimension of 4.4 inches diameter and 2.17 inches depth.

Technical Specifications

• Name: Nilight 4 Inch Round Trailer Tail Light 2PCS 24LED
• LEDs: 24 x 2835 SMD
• Mounting hole: 4.4" diameter, 2.17" depth
• Voltage: 12V
• Protection rating: IP65

Usage Recommendations

Installers should confirm the 4.4 inch hole and 2.17 inch depth before fitting to ensure a flush surface mount and correct wiring alignment. Tighten the supplied screws and nuts to secure the chrome bezel and avoid overtightening which can stress the lens. For electrical connections use appropriate wire crimps or soldered joints and protect exposed terminals against corrosion, especially in marine environments.

Nuances and Limitations

While the IP65 rating protects against water jets and heavy rain, it does not guarantee submersion resistance so avoid installing where the unit could be fully underwater. Brightness and light pattern will vary with mounting position and vehicle bodywork, and according to the manufacturer these lights are intended for 12V systems only.