UGREEN Ethernet Cable 1m Cat 8 Flat RJ45 (40Gbps, 2000MHz) for PC, PS5, Xbox, Router & Switch

What you’re buying and what it’s for

This UGREEN Ethernet Cable is a flat Cat 8 patch lead designed for wired internet setups where you want a neat run and consistent performance. At 1m long, it’s clearly aimed at the smaller “last stretch” jobs: linking a router to a nearby device, connecting a gaming console, or adding a direct LAN line between a switch and something else in the same room.

On paper, it targets higher-spec networking than typical Cat5e or Cat6 leads, with support claimed up to 40Gbps and 2000MHz bandwidth. The practical question is whether your wider setup can actually make use of it. A cable like this can help with signal integrity and reduce interference compared with less shielded alternatives, but it can’t create faster speeds if your router, switch, or ISP link is the limiting factor.

Key points: where it stands out

The headline features are pretty clear: flat cabling that’s easy to route, shielding intended to reduce interference, and a nylon outer designed for better wear resistance than basic PVC.

That combination makes it feel more like a “tidy home install” cable than a throwaway lead. If you’ve ever wrestled with round Ethernet cables that spring back up, snag on door frames, or sit awkwardly across carpets, the flat design is the sort of thing you’ll notice day to day.

Tech specs

• Type: Ethernet / RJ45 LAN patch cable (Cat 8)
• Cable length: 1m
• Claimed speed: up to 40Gbps
• Claimed bandwidth: up to 2000MHz
• Conductors: pure copper, 26AWG
• Shielding: U/FTP
• Connector: RJ45
• Outer material: high-density nylon
• Compatibility claim: works with RJ45 devices, also states compatibility with Cat 7, Cat 6a, Cat 6, Cat 5, Cat 5e

What you’ll notice in everyday use

A flat Ethernet cable tends to behave differently to round ones. Here, the idea is that it bends and folds more easily for short runs, and it takes up less space under rugs, beneath a threshold, or along a corner of a desk. If your setup is tight—say, your router is on one side of a room and your PS5 or PC is on the other—this kind of lead can keep things looking less chaotic than a dangling coil.

The cable is also described as shielding-capable (U/FTP) and made with copper conductors. In real-world terms, that’s usually the difference you feel when the cable has to share space with other electronics, or when you want steadier signal quality than you might associate with Wi‑Fi. Still, it’s worth bearing in mind that Ethernet performance also depends heavily on what you plug it into.

Strengths and limitations (the honest bit)

Strengths - Flat, flexible design that’s easier to route and store in small spaces. - Nylon outer is positioned as tougher and more wear-resistant than typical PVC, which is relevant if the cable gets moved or sits in a busy area. - U/FTP shielding and pure copper conductors are aimed at reducing interference and keeping the connection more consistent. - Broad stated compatibility with a long list of RJ45 devices (including common home network hardware and gaming consoles).

Limitations / where it may fall short - The claimed 40Gbps and 2000MHz specs are “up to” figures, if your router, switch, or network plan can’t use Cat 8 levels, you won’t see magic speed jumps. - At 1m, it’s not a “run it across the house” cable. If you need more reach, you’ll likely be shopping for a longer lead.

Who it suits (and who should think twice)

It makes the most sense if you want a short, tidy wired connection and you care about reducing cable clutter. This is particularly relevant if you’re wiring:

• a PC or laptop into a router or switch nearby,
• a PS5 / Xbox into a console-friendly LAN port,
• a TV, smart TV box, or media player with an RJ45 socket,
• a modem/router or switch setup where a clean patch lead matters.

It might not be the best match if you need long distances, frequent cable swapping across rooms, or you’re expecting Cat 8 to overcome a bottleneck upstream. In those cases, focusing on overall network capability (router/switch ports and your internet service) tends to be the bigger lever.

What to double-check before you buy

Before committing, it’s worth checking a few practical things:

• Distance: 1m is only for short links, so measure your intended route.
• Device ports: the cable is RJ45, so confirm your router/switch/console/TV box actually has an Ethernet (LAN) port.
• Your network goal: if your goal is “more stable than Wi‑Fi”, wired Ethernet usually helps. If your goal is “top-end speeds”, your router/switch and internet plan need to be capable too.
• Routing style: if you plan to tuck the cable under a rug or along a desk edge, the flat form factor is the part you’re buying for.

Is it worth it?

It’s a solid purchase if you want a short Cat 8 RJ45 patch lead with a flat, low-profile design, plus shielding and a nylon outer aimed at resisting everyday wear. The spec sheet reads like it’s built for future-ish bandwidth needs, but the real value depends on whether your network gear can actually take advantage of it.

You may want to skip it if you need more than 1m length, or if you’re already confident your setup is the main limiter (router capabilities, switch ports, and the internet connection itself). In those situations, spending only on “higher category” without matching the rest of your network is where people get disappointed.

Mini FAQ

Is this cable suitable for gaming consoles like PS5 and Xbox?

The listing states compatibility with devices that use an RJ45 connector, including PS5 and Xbox. With a short 1m lead, it’s best for nearby console setups.

Will Cat 8 guarantee 40Gbps speeds on my home network?

The product claims up to 40Gbps and 2000MHz, but real throughput depends on your router, switch, and overall network path. If those aren’t aligned with Cat 8 class performance, you may not see the top-end figures.

Can I route it under a carpet or desk?

Yes, the cable is designed as flat and easy to bend and store, with the description specifically noting it can be slid under a carpet, threshold, or along a desk corner.

Is it compatible with older Ethernet categories?

It’s stated to work well with devices supporting Cat 7, Cat 6a, Cat 6, Cat 5, and Cat 5e, and with RJ45 ports generally.

What makes the flat design useful compared to round Ethernet cables?

Flat cables typically lie flatter and are easier to tuck away in tight spaces. That’s especially helpful when you want to minimise snagging and keep the run looking tidy.