TP-Link PoE170S PoE++ injector 60W
Product description
Power up a non-PoE switch or device without replacing it, using the TP-Link PoE170S PoE++ injector. It converts non-PoE Ethernet into PoE so you can run compatible network gear over a single wired link. With support for PoE standards up to 60W, this is a straightforward way to add PoE capability for installations like IP cameras and access points.
If you have existing equipment and want to avoid downtime or extra hardware, this plug and play adapter is built for fast setup. You can mount it on a desk or a wall, and it keeps things tidy with a metal case that suits day to day deployments. It also includes auto detection so the injector can deliver power to a connected PoE device while maintaining backwards compatibility. 🙂
Key features
The POE170S is designed to enable PoE where you otherwise only have a non-PoE switch or device. That means you can keep your current network gear and still power PoE capable equipment from the Ethernet side. It uses Gigabit Ethernet input and output ports, so you do not have to compromise on wired speeds for typical camera and access point workloads. ⚙️
Setup is simplified with plug and play operation, with no software installation or configuration required. For many installs, that matters as much as raw power, because it reduces time spent on commissioning and troubleshooting. The injector is also built for longer cable runs, with power transmission up to 100 metres, which suits large rooms and installations where devices are not right next to the network cabinet. 📷
Auto detect technology helps it deliver up to 60W to a PoE+ device and it supports backwards compatibility for 802.3af PoE devices rated at 15.4W. That makes it practical when your connected hardware has different PoE classes, without you needing to micromanage settings. It is a simple, reliable approach for mixed deployments.
Tech specs
- Name: TP-Link POE170S PoE++ Injector
- Type: PoE injector, non-PoE to PoE adapter
- IEEE standards supported: 802.3af, 802.3at, 802.3bt
- Power delivery: up to 60W
- Ports: 2× Gigabit Ethernet ports
- Input and output: 1× Gigabit Ethernet input port, 1× Gigabit Ethernet output port
- Transmission distance: up to 100m
What stands out
A key benefit of the TP-Link POE170S is that it adds PoE capability without asking you to replace your existing switch or device. If your network is already in place and you simply need to power one or more endpoints, this injector approach can keep changes limited. It is also suitable when you want a clean deployment, because it supports both desktop use and wall mounting. 🧱
The injector includes auto detect, which helps it deliver the right power level for a connected PoE capable device within the supported range. You can also count on backwards compatibility for 802.3af devices, which helps when older PoE hardware is part of the setup. Worth noting that the exact power delivered depends on the connected PoE device capabilities and class.
It can be a good fit if you are planning IP camera or access point deployment where cabling runs can reach up to 100 metres. You will like it if you want a Gigabit PoE conversion method that is straightforward to deploy with minimal setup steps. It’s not for you if your use case needs features beyond PoE conversion, for example advanced network management or custom power control, as the unit is focused on simple power delivery. 🙂
Where it shines
It makes sense if you are building a network for surveillance or wireless access in areas with moderate to long cabling distances. The plug and play behaviour helps keep the commissioning process practical, especially when you are fitting devices across a site rather than setting everything up in one tight rack. In day to day use, the metal case adds a more robust feel for installs that need to withstand handling during setup.
It also suits customers who prefer a low disruption approach. Instead of swapping your non-PoE switch for a PoE model, you can use the injector at the point where you need PoE output. When you prioritise easy installation, reliable power delivery up to 60W, and Gigabit wired performance, the POE170S is a solid way to add PoE on demand.