REYLAX 24V Triac dimmable LED driver (80W, 3.33A) for constant voltage LED installations
Product description
If you’re setting up LED lights that you actually want to dim smoothly, the REYLAX 24V Triac dimmable LED driver is aimed at that job. It’s designed for constant-voltage LED applications, with a Triac dimming approach and a defined dimming range. On paper, it looks built to be reliable day-to-day rather than flashy.
That said, it’s not a universal “fix everything” driver. It only makes sense for LED loads, and the dimming behaviour will depend quite a bit on whether your LED strip/array sits within the recommended operating window.
The essentials
This is a 24V constant-voltage power supply/LED driver for LED applications. The input is AC 200–240V and the output is DC 24V up to 3.33A (80W maximum). For dimming, it’s specified for a range of 5% to 100%.

In practical terms, you’d use it where your existing installation needs a proper driver between the mains and a 24V LED load. The “out of sight” angle also matters: it’s a compact unit made from Class II flame-retardant material, intended to fit into most cut-outs.
What stands out in day-to-day use
The biggest selling point here is the dimming design. With Triac dimming and a 5%–100% stated range, it’s aimed at installations where you want usable control from near-low light up to full brightness.
There’s also a sensible electrical/efficiency story. The power factor is specified as greater than 0.95, which typically means less waste and less burden on the supply compared with drivers that sit lower on power factor.



On top of that, the safety positioning is fairly comprehensive for this category: short-circuit, over-current, over-voltage and over-temperature protections are listed. That doesn’t make it indestructible, but it does reduce the risk of a driver running into avoidable faults.
Key compatibility & where it may fall short
This driver is for LED applications only. It’s explicitly not suitable for motors, doorbells or other mechanical products. So if you’re looking to power something non-LED, this is a hard stop.
It also comes with a loading recommendation: for best efficiency and performance, keep the load between 70% and 85% of its maximum capacity. With an 80W unit, that guidance is there for a reason—if your LED load is consistently too low (or too close to full load), the experience may be less smooth or less optimal than expected.

There’s another small practical limitation to bear in mind: while the driver is described as having moisture and dust protection and being compact, the exact installation environment still matters. If you’re pushing it into a damp or awkward enclosure, it’s worth checking your overall IP approach rather than assuming one line in the listing covers everything.
Quick overview of specs that affect buying decisions
Here are the details that typically influence whether a driver “fits” your current setup: - Input: AC 200–240V - Output: DC 24V, up to 3.33A (80W max) - Dimming range: 5%–100% - Recommended load window: 56W–68W - Power factor: greater than 0.95
Those numbers are the practical checklist: you’re matching voltage (24V constant voltage), current/total wattage (within the maximum, and preferably within the recommended range), and the dimming system type (Triac).



Installing it without overcomplicating things
The unit is described as compact and suitable for most cut-outs, plus it’s Class II flame-retardant. It also states it’s easy to install and wire.
A concrete example: if you’re upgrading a 24V LED strip run and you already have a compatible Triac dimmer, this driver is the kind of component you’d put behind the mounting area. You’d wire mains input to the driver, then run the 24V constant voltage output to your LED strip/array, aiming to keep the total LED wattage within the listed recommended load range for smoother operation.
Is it worth it?

It’s worth buying the REYLAX 24V Triac dimmable LED driver if you have (or plan) a 24V LED installation that you want to dim using a Triac dimmer, and your total LED load sits within the recommended window (56W–68W is stated) rather than floating around well below/near maximum.
You may want to skip it if you need a driver for non-LED equipment, or if your LED wattage requirement can’t realistically be held near that recommended loading guidance—then you might end up with a “works, but not quite right” situation.
For anyone building or replacing a compact LED driver for a 24V constant-voltage setup, it’s a sensible middle-of-the-range practical pick: the protections, power factor and dimming spec all point to a unit intended for real installations, not just bench testing.
Mini FAQ



Can this driver be used for non-LED products?
No. It’s stated to be for LED applications only and not suitable for motors, doorbells or other mechanical products.
What dimming range does it support?
The dimming range is specified as 5% to 100%.
What voltage and output should I expect?
It takes AC 200–240V input and outputs DC 24V up to 3.33A maximum.
What wattage should my LED load be?
The listing recommends keeping the load between 70% and 85% of maximum capacity, and it also states a recommended load of 56W–68W.
Is it suitable for enclosed installations?
It’s described as moisture and dust protected and made from Class II flame-retardant material, but your specific enclosure/IP requirements should still be considered before fitting.
Products with discounts that might interest you
- REYLAX LED Driver 24V 150W IP67 Outdoor Transformer for Garden Lighting
- eSynic ARC eARC Audio Extractor 192kHz
- Thermalright Phantom Spirit 120 EVO CPU Air Cooler with Dual PWM Fans
- GMY MR16 50W 4000h 3000K GU5.3
- YARCHONN SCART to 3 RCA Cable Lead Converter Adapter (2-pack) 1.5m
- GP Ultra AA Batteries 40 Pack (1.5V Alkaline) – Reliable Power for Everyday Devices
- DUSKTEC 12V LED Driver 15W Slimline Transformer (240V AC to 12V DC)
- JARXIOKE 3000W pure sine power inverter
- Cantonape 1500W Pure Sine Wave Inverter 12V to 230V
- Lepro E14 4W LED Candle Bulb 470lm
- DUSKTEC 24V LED driver 30W 1.25A
- NZXT Kraken 280
- Samsung 990 PRO 2TB NVMe SSD (M.2, PCIe 4.0)
- SwitchBot Indoor Outdoor Hygrometer Thermometer Wireless 3-Pack
- Thermalright AQUA ELITE 360 V3 360mm AIO
- Thermalright TR Peerless Assassin 120 Digital ARGB air cooler with digital display (Dual 120mm, LGA 1700/AM5)
- URAQT 12V LED Driver 200W 12V transformer for strip lights 🔌
- ACCUWEIGHT Blue 300g precision scale 0.01g
- TR-AQUA ELITE 360 V6 ARGB Black-CPU Liquid Cooler
- MiLESEEY XTAPE1 Digital Tape Measure with Laser – Precision, Pro-Grade App Sync
- Thermalright TL-C12CW-S 120mm ARGB PWM Fan review: solid micro-forcing for case and CPU cooling
- 8 in 1 200W Car Power Inverter (12V to 240V/230V) with 2 AC Sockets, 4 USB & 2 Type-C
- Daknswte solar panel 8.5cm replacement
- eSynic Professional 192kHz eARC/ARC to Optical Audio Extractor Cable

