DUSKTEC 24V LED driver 30W 1.25A
Reviews
Price
Product description
A compact low voltage LED driver can make a big difference to how smoothly your 24V lighting system runs. The DUSKTEC 24V LED Driver 30W 1.25A is a constant voltage power supply that converts AC 240V mains into a regulated 24 V DC output, helping you run compatible LED strips and low voltage bulbs with consistent performance. It is also non-dimmable, so it suits straightforward installations where you want stable power rather than dimming control.
If you are fitting 24V single colour LED lighting in residential or light commercial spaces, this transformer style driver offers a practical way to power the LEDs safely. According to the manufacturer, it is compact, Class II, and built to include protection against common electrical faults. ✅ It is also rated IP44, so there is an added layer of protection for dust and splashes in suitable indoor locations.
Key features
This DUSKTEC LED driver is built for 24 V DC low voltage LED setups, with a constant voltage output that stays within the 24 V DC specification. The AC input range is listed as 100 to 240 V at 50 or 60 Hz, which helps it match common UK mains conditions when installed correctly. The output is rated for 1.25 A, giving a maximum load of 30 W. Because it is non-dimmable, it pairs best with LED strips and modules that do not require dimmer control.
The transformer is designed around reliable internal circuitry, and the manufacturer notes protections for overvoltage, overheating, overcurrent, and short circuits. There is no minimum load requirement, which can be useful when your LED load does not fully occupy the driver’s full capacity. It is housed in flame-retardant ABS material and is described as dustproof, supporting use in tighter, enclosed mounting areas.
Installation is intended to be straightforward, with the manufacturer stating that tradespeople who are not trained electricians will be able to connect it. Still, if you are unsure about wiring or compatibility, check your installation plan carefully before powering anything up. 🤝
Tech specs
- Name: DUSKTEC 24V LED Driver 30W 1.25A
- Type: LED transformer driver, constant voltage power supply
- Input voltage: AC 100–240 V, 50/60 Hz
- Output voltage: 24 V DC constant voltage
- Output current: 1.25 A
- Maximum load: 30 W
- Dimensions: 142 x 50 x 16 mm
Pros
A big advantage of choosing this type of 24 V constant voltage LED driver is that it helps keep your LED strip lighting consistent. It is non-dimmable, so you do not need to plan a dimmer controller for it, which can simplify installations for under-cabinet lighting, stair step lights, and indoor deck lights. The manufacturer also states it produces zero radio interference, which is a useful reassurance for electronics friendly setups. 📶
The IP44 rating matters for installations where dust and splashes could be a concern, while the flame-retardant ABS housing adds confidence when fitting under cabinets, within light fittings, or behind suitable covers. Protection features such as overvoltage and overheating shielding are there to reduce the risk of faults during normal use. The manufacturer also notes there is no minimum load, so you are not forced to run the driver close to its ceiling just to avoid issues.
There is one practical limitation to keep in mind. The manufacturer advises loading the LED driver to no more than 80% of capacity for a longer working life span. That means you should consider your LED strip or module power draw before installation, rather than running right up to 30 W at all times.
What to know before you buy
Worth considering if you are planning a 24 V single colour LED project where the LEDs are specified to run from 24 V DC constant voltage. You will likely find it suits LED strips, COB strip lights, under-cabinet lights, LED displays, stair step lights, and 24 V LED modules. It is also described as suitable for G4 lights and MR11, MR16 variants, including MR11 or MR16 style bulbs listed for low voltage use. 🏡
Not the best choice if you need a dimming function, because it is specifically described as non-dimmable. Also, the manufacturer explicitly asks you to confirm the voltage and power before purchase, as correct matching is essential for safe and reliable operation. If your LED load is close to the upper limit, remember the 80% capacity guidance for longevity.
Who it’s for
It makes sense if you are an installer or DIY user creating a 24 V DC lighting layout and want a compact constant voltage driver for compatible LED strips, modules, and low voltage bulbs. You may also like it if your project needs IP44 protection and you prefer a Class II transformer style solution with built-in safeguards. It is a solid pick for indoor 24 V lighting runs where you want stable output and fewer concerns about electrical fault conditions, as long as you match the LED voltage and power correctly.