Perlegear TV Wall Bracket 37–82 inch 📺
Description:
This tilting wall mount holds most 37–82 inch flat or curved TVs and helps free up floor space while improving viewing comfort. The slim tilt TV bracket reduces reflections by offering an 8° downward tilt, which can be useful when screens face windows or bright lights 📺. It is intended for TVs with VESA patterns up to 600x400mm and offers a secure, low-profile fit.
Key Points
The mount has a slim profile that sits approximately 38mm from the wall, giving a neat, low-profile appearance and easier cable routing. It includes pull cord locking mechanisms so the screen can be secured to the bracket or released for removal without awkward manoeuvres 🔧. The construction is cold-rolled steel with a rust-resistant finish, which the manufacturer says resists bending under load and supports larger TVs reliably.
This product is compatible with a wide range of displays. Check the TV weight, size and VESA pattern before fitting, because compatibility depends on those measurements according to the manufacturer. Consider that deep or unusually shaped TV bases may affect clearance when tilting.
Technical Specifications
- Name: Perlegear TV Wall Bracket for Most 37–82 inch TVs
- Maximum load capacity: 60 kg
- Supported VESA: 200x100 mm to 600x400 mm
- Tilt range: 8° downward
- Distance from wall: 38 mm
Usage Recommendations
When installing, position the open wall plate so you can access an electrical outlet if needed. The bracket can be mounted on 16 inch to 24 inch wood studs, solid concrete or brick. Use appropriate fixings for your wall type and follow the included instructions step by step. For safety, have a second person help with lifting and aligning the TV during attachment, particularly with heavier displays.
A practical note: the modest tilt is aimed at reducing glare rather than radical angle adjustment, so this mount is more suited to living rooms and bedrooms where a small downward tilt improves sightlines. Also bear in mind that very large or non-standard curved screens should be measured carefully against the 600x400mm VESA limit.
