IBRA 2.1 HDMI Cable (Orange) 1.5m – High-Speed 48Gbps for 8K@60Hz and 4K@120Hz
Reviews
Price
Product description
The essentials
If you’re trying to get the most from a newer HDMI setup, an HDMI 2.1 cable can make life simpler. The IBRA 2.1 HDMI Cable (Orange) is a 1.5m lead built around the newer HDMI 2.1 spec, with a stated bandwidth of 48Gbps and support for resolutions and refresh rates up to 8K@60Hz and 4K@120Hz, plus 3D support and Ethernet function.
On paper, it’s aimed at people who actually care about high-spec video modes—whether that’s gaming, a 4K TV feed, or connecting an 8K-capable media player. The reality check is that the cable can only deliver what your sources and display are able to accept. Still, if you’re using devices that support these modes, this is the sort of spec-led cable worth considering rather than relying on an older HDMI lead.
Where it shines
A big part of this cable’s appeal is its approach to performance and signal handling. It uses a braided nylon design intended for durability, along with 24K gold-plated connectors (as described) to support stable signal transfer. It also specifies 100% OFC (oxygen-free copper) conductors and triple EMI shielding.
In practical terms, that combination is designed to keep signal quality consistent—particularly in setups where the cable runs close to other electronic devices. For example, if your console, streaming box and TV sit in the same entertainment unit with power adapters and network hardware nearby, a properly shielded, sturdier cable is the more sensible match than a thin, generic lead.
There’s also the speed headline: 48Gbps bandwidth, positioned as “high-speed” enough for the data required for 8K UHD transmission (again, as stated by the product details). If you’re building a future-minded HDMI wall and want the cable to be unlikely to be the limiting factor, that’s the logic here.
Things to be aware of
Two limitations are worth keeping in mind before you buy.
First, the cable length is 1.5m. That’s fine for many TV-to-device setups, but if your TV sits on a longer run (or you’re routing behind furniture), you may find it too short.
Second, HDMI 2.1 features like 4K@120Hz and 8K@60Hz only matter if your TV and connected device support them. If your display or source is limited to older HDMI modes, you won’t “unlock” anything magical by using a newer cable—what you get is only what both ends can negotiate.
Compatibility and use cases
The product listing says it’s compatible with HDMI Type A ports (so you’re not dealing with weird connector standards). It also mentions compatibility with several common device types—such as Fire TV, Xbox, PS3, PS4, and PC, plus other HDMI-enabled devices.
Where it makes particular sense is when you want one cable to cover more than a single use. For instance, the same lead can sit between a gaming console and a 4K/120Hz-capable TV, then be reused for a media box when you’re watching high-resolution content later. It’s not only about “gaming features”, it’s the general ability to carry higher bandwidth video signals.
Technical details (what’s claimed)
- Type: HDMI 2.1 cable (HDMI Type A)
- Length: 1.5m
- Bandwidth: 48Gbps
- Video support: 8K@60Hz, 4K@120Hz
- Chroma support: 4:4:4
- Features: 3D support, Ethernet function
- Conductors: 100% OFC (oxygen-free copper)
- Shielding: triple EMI shielding
Pros
- Spec-led for higher resolutions and refresh rates, including 8K@60Hz and 4K@120Hz (as claimed)
- Braided nylon design aimed at durability, plus gold-plated connectors
- 100% OFC conductors and triple EMI shielding are designed to support stable transmission
- Ethernet function and 3D support are included per the listing
When it makes sense to buy it
This is a solid choice if you’re pairing a compatible HDMI 2.1 device with a TV or monitor that can actually make use of higher modes, and you want a cable that’s built with shielding and sturdier materials rather than something purely budget-focused.
It’s also the sort of cable to choose if you’re planning a setup around future-proofing—because replacing cables every year gets annoying, and this one is at the newer end of the HDMI spec range.
Should you buy it?
A straightforward buying verdict: buy the IBRA 2.1 HDMI Cable if you need a short 1.5m lead and your TV and source can use higher-bandwidth HDMI 2.1 settings like 4K@120Hz or 8K@60Hz. The braided nylon build, 24K gold-plated connectors, OFC conductors and triple shielding give it a more confident “don’t be the weak link” feel.
You may want to skip it if your setup is older and can’t take advantage of those modes, or if 1.5m isn’t long enough for how you’ve arranged your entertainment unit. In those cases, you’d be paying for specifications you can’t really use.
Quick FAQ
Will this cable work with any HDMI device?
It’s described as compatible with HDMI Type A ports, including a range of HDMI-enabled devices listed in the product details. If your device has a standard HDMI Type A socket, it should be the right physical match.
Does 8K@60Hz happen automatically?
Not automatically. The product states support for 8K@60Hz and 4K@120Hz, but you’ll need a source and display that can negotiate and support those modes.
Is 1.5m the right length?
It depends on your setup. For many TV-to-console or TV-to-streamer placements it’s fine, but if you need more reach you’ll likely want a longer cable.
What’s the benefit of the extra shielding?
The listing claims triple EMI shielding, which is aimed at reducing interference and supporting stable signal transmission—useful in real-world entertainment units with multiple power and network devices nearby.