ELEGOO Rapid PLA Plus 1.75mm 8-pack (250g spools) – 8 colours, high-speed 3D printer filament bundle
Product description
What it is and why you’d want it
This ELEGOO Rapid PLA Plus bundle is a 3D printer filament pack built around speed and day-to-day usability. It’s PLA+ in 1.75mm format, supplied as eight separate 250g spools in eight colours (black, white, grey, red, blue, yellow, green and orange). On paper, the appeal is straightforward: you get variety for different projects, while the “rapid” positioning focuses on fast printing.
In real buying terms, bundles like this tend to make sense when you regularly run multi-colour parts, test designs, or simply don’t want to run out of a single colour mid-project. The question is whether the “high-speed” angle fits your printer and your expectations—because speed claims can only matter if your setup is consistent enough to feed reliably.
Key takeaways
If you’re after an 8-colour PLA+ set that’s made to print quickly and feed smoothly, this bundle is aiming straight at that use case. The manufacturer also highlights reduced tangling through mechanical winding and inspection, plus dimensional consistency at ±0.02mm for the 1.75mm diameter.
It’s not likely to be a “one filament does everything perfectly” scenario—PLA+ is still PLA-based, and very demanding mechanical performance expectations may be better met with other material types. But for prototyping, jigs, decorative functional parts and general making, it can be a sensible pick, especially if you value having colours ready.
What stands out in use
The most practical part of this bundle is the combination of (1) multiple colours and (2) a filament intended for faster printing.
The description calls out enhanced fluidity so the material melts and flows smoothly, with speeds up to 600mm/s mentioned. If you’ve been doing prints where time matters—like producing several prototypes back-to-back, or churning out batches for a workshop—faster printing can be genuinely useful. That said, you’ll still want to treat those top-end speed numbers as an upper target rather than something you can automatically hit on every job. Layer adhesion, cooling, and your printer’s motion system all play a role.
There’s also a clear quality focus around how the filament is wound. Neat winding and inspection are meant to reduce tangles and help avoid snap and breakage issues when you’re running long prints.
Here’s a micro example: imagine you’re printing an enclosure test piece and you also want matching labels or accent brackets. Having black, white and a couple of bright colours in the same bundle lets you do quick variations without waiting for a reorder.
Tech summary (what matters most)
- Name: ELEGOO Rapid PLA Plus Filament
- Type: PLA+ 3D printer filament
- Format: 1.75mm diameter filament
- Bundle capacity: 8 colours, 8 spools
- Spool size: 250g per spool (as stated)
- Colour options in the pack: black, white, grey, red, blue, yellow, green, orange
- Printing speed (claimed): up to 600mm/s
- Dimensional accuracy (claimed): ±0.02mm
Who it suits (and who should be cautious)
It makes sense if you want an affordable way to stock multiple colours of PLA+ and you’re specifically interested in faster printing. The bundle positioning also suggests it’s aimed at people who already use (or plan to use) printers that can handle higher-speed profiles.
It may not suit you as well if: - you prioritise ultra-fine tolerances and consistency above all else (the stated ±0.02mm is a good sign, but final print results still depend on your machine and settings) - you expect PLA+ to replace higher-performance engineering materials for heavy loads - you often print at conservative speeds only—then the “rapid” advantage may not show much in your workflow
Worth considering if your projects are frequent enough to use several colours, because otherwise you might simply end up with spools you won’t touch.
Compatibility & requirements
The description says it fits both regular printers and high-speed printers, with examples including Neptune series, Ender series and A1 series, plus P1P. If you’re running a different setup, it’s still “for most 3D printers” in general terms—but the safest approach is to confirm you’re using 1.75mm filament and that your printer can support the kind of speeds you want to run.
Also, if you’re chasing the higher speed claim, remember that your hotend temperature, cooling, and print profile tuning are usually where real-world results come from.
Is it worth it?
Buying this ELEGOO Rapid PLA Plus bundle is a good move if you want an 8-colour PLA+ stockpile in 1.75mm and you’re looking for filament that’s designed to print quickly with consistent feeding. The combination of neatly wound spools and stated dimensional accuracy is the sort of practical detail that can help when you’re pushing longer or faster jobs.
However, don’t treat the “up to 600mm/s” figure as guaranteed for every print. If your priority is slow, highly controlled prints, or if you need material performance beyond what PLA+ typically offers, you may want to look at other material approaches instead.
Quick FAQ
Does this filament come as multiple colours?
Yes. The pack includes eight colours (black, white, grey, red, blue, yellow, green and orange), supplied as eight 250g spools.
What diameter is the filament?
It’s 1.75mm.
Is it aimed at high-speed printing?
It’s positioned for high-speed printing, with up to 600mm/s mentioned, and it’s described as having enhanced fluidity for smoother flow.
Will it be consistent for feeding?
The description claims dimensional accuracy of ±0.02mm for the 1.75mm diameter and highlights strict tolerances intended to support consistent feeding.
Where might you want to be careful?
If you plan to run very high speeds, your printer settings and cooling matter. Also, if you want a filament for heavy-duty mechanical demands, PLA+ may not match what you’re hoping for.