BONTEC Ultra Slim TV Wall Bracket 45kg

This ultra slim TV wall bracket from BONTEC keeps screens close to the wall while allowing a slight tilt to reduce glare, making it suitable for living rooms and bedrooms where a clean profile and improved viewing angle are desired. It fits most flat and curved TVs between 23 and 60 inches, supports up to 45 kg according to the manufacturer, and works with common VESA patterns for straightforward mounting.

Key Points

The bracket holds televisions just 30 mm from the wall for a discreet, low-profile look. It offers up to 10 degrees of forward tilt to help reduce reflections and fine-tune the eye-level angle. Built from cold-rolled steel, the mount is designed to provide a sturdy support and a reliable fixing once installed. The package includes installation accessories and a simple guide, plus five cable ties to help keep wiring neat and organised. Consider that you should confirm your TV’s VESA pattern, weight and dimensions before fitting to ensure compatibility.

Technical Specifications

• Name: BONTEC Ultra Slim TV Wall Bracket
• Compatibility: 23–60 inch televisions
• Maximum load: 45 kg
• VESA support: 400x400, 400x300, 400x200, 300x300, 200x200, 200x100, 100x100, 75x75 mm
• Distance from wall: 30 mm
• Tilt: up to 10 degrees

Usage Recommendations

Install on solid surfaces such as concrete or brick, or fix to timber studs for the best support. Use the included wall anchors for masonry and the recommended screws for stud mounting. After hanging the TV, use the supplied cable ties to route power and connection leads along the bracket for a tidier installation. If your television is near the upper limit of the supported weight or size ranges, double-check the screw positions and wall fixings to ensure maximum stability.

Positive Aspects

The low profile design helps televisions blend into the room without protruding hardware. The modest forward tilt improves viewing comfort in bright rooms where ceiling lights or windows cause reflections. Included accessories and a bubble level aim to make alignment easier during fitting. One limitation to note is that there is no lateral movement or swivel, so repositioning the screen horizontally after installation will require unmounting and remounting.