JXMTSPW TV Wall Bracket tilt for 14–42" TVs
Product description
This slim TV wall bracket offers a simple way to mount LED, LCD or OLED screens between 14 and 42 inches, keeping the display close to the wall while allowing a modest tilt to reduce glare and neck strain. It supports up to 25 kg and fits a wide range of VESA patterns, making it suitable for smaller living rooms, bedrooms or study spaces where a compact, tidy installation is required.
Key Points
The bracket keeps the rear of the TV just 48 mm from the wall for a low-profile look. It includes a spirit level to help get the mount straight during installation and the integrated tilt allows roughly 15 degrees of upward or downward adjustment to fine-tune viewing angle. The manufacturer states compatibility with common panel sizes and brands that use VESA patterns up to 200 x 200 mm. Consider that this product is not intended for mounting on plasterboard without additional reinforcement and you should check your television’s VESA pattern and weight before fitting. 🛠️
Technical Specifications
- Name: JXMTSPW TV Wall Bracket Tilt for 14-42"
- Maximum load capacity: 25 kg
- VESA compatibility: 200 x 200 / 200 x 100 / 100 x 100 / 100 x 200 / 75 x 75 / 50 x 50 (mm)
- Distance from wall: 48 mm
- Tilt range: ±15 degrees
Usage Recommendations
Fit the wall plate to a solid stud or masonry surface for the safest installation, and use the supplied hardware that corresponds to your wall type. When adjusting the tilt, move the screen gently to avoid stressing mount points. For curved panels and thicker frames, verify exact screw length and spacing beforehand to ensure a secure hold. 🔧
Advantages
Made from pressed cold-rolled steel with a coated finish, the bracket is intended to offer durable support and a neat appearance. The universal hole pattern and compact profile help reclaim floor space and create a cleaner viewing area, while the included spirit level simplifies alignment during mounting. Note that very large or heavy televisions beyond the stated weight or VESA limits are not compatible with this mount. 🧭