Alvin's Cables Tentacle Timecode Cable 35cm
Product description
This compact timecode cable connects a Tentacle Sync E timecode generator or Track E recorder directly to compatible Sony cameras, keeping audio and video precisely synchronised during shoots. It is intended for on-set and location recording where reliable timecode transfer to cameras such as the Sony FX3 is required. The cable helps reduce post-production syncing time by delivering a clean timecode feed to the camera's multi/micro USB port.
Key Points

Designed for straightforward integration, this lead uses a right-angle 3.5mm TRS plug at the recorder end and a micro USB at the camera end. The low-profile right-angle design helps prevent accidental unplugging and keeps the connection neat in cramped rigs. It is supplied at a short length to avoid excess cable slack on gimbals and small rigs, which is useful for handheld and run-and-gun workflows. ⚙️


Manufactured cables are tested for continuity and short circuits before dispatch according to the seller's process. If a fault is found on receipt, the supplier indicates they will resolve the problem or provide a replacement. Consider that longer reach setups may require a custom-length cable or an alternate routing strategy.

Technical Specifications
- Name: Alvin's Cables Tentacle Timecode Cable
- Connectors: 3.5mm TRS right-angle to micro USB
- Compatible with: Sony FX3, FX30, A7S3, A1 (multi/micro USB terminal)
- Length: 35cm / 13.8in
- Purpose: Timecode feed from Tentacle Sync E, Track E or Timebar



Usage Recommendations
Route the lead alongside existing camera power or HDMI cables to keep the setup compact and reduce stress on the micro USB port. For gimbal use position the cable so the right-angle 3.5mm remains unobstructed and away from moving parts. If you need a different run length, contact the seller before ordering to request a custom size. 🎬

When connecting, ensure the recorder is set to output timecode on the relevant channel so the camera receives a dedicated TC signal rather than an audio mix. Keep in mind that micro USB camera ports are not mechanical locking connectors, so avoid tugging at the cable during takes to prevent intermittent loss of timecode. 🔌
The Best of This Model
This lead is a simple, purpose-built accessory that keeps the signal path short and direct which helps maintain a stable timecode feed on compact Sony bodies. The short length reduces cable management hassles while the right-angle TRS plug offers a tidy fit on small recorders and adapters.
Products with discounts that might interest you
- UGREEN HDMI Extension Cable 4K 2.0
- SWECENT 4K USB-C to HDMI Cable (2m) with Plug and Play and HDCP 2.2
- acer USB C to Display Port Cable 2m
- TP-Link Tapo L630 4-pack GU10 smart bulbs
- DisplayPort 2.1 cable 2M for 80Gbps
- True HQ HDMI Cable 15M 4K 60Hz HDMI cable
- UGREEN Micro HDMI to HDMI 2.1 Cable 8K
- Twozoh 4K High Speed HDMI 2.0 Cable (10m) for PS5, Xbox, PC, Projector and HDTV
- UGREEN HDMI 2.1 Cable 5M
- UANTIN 4K DisplayPort to HDMI Cable 1.8m
- UGREEN Mini HDMI to HDMI 2.1 Cable 2m 48Gbps
- Ubluker 10K/8K/4K HDMI Cable 48Gbps 3M – Certified Ultra High Speed HDMI cable for 4K/8K/10K with eARC/ARC
- UGREEN USB C to HDMI Cable 2m 4K@60Hz
- XAOSUN HDMI 2.0 cable 18Gbps, 3m
- ZIKNYDO USB C to USB C 2m cable 240W for monitors
- Acer USB C to HDMI Cable 2m 4K@60Hz
- Amazon Basics 16-Gauge Speaker Wire 1.3 mm² (15.24 m) – Transparent
- ANNKE 30M CCTV extension cable with BNC connectors 🎥
- UGREEN HDMI 2.1 Cable Certified 8K/10K 48Gbps 3m
- Mini HDMI Cable High Speed: Mini HDMI to HDMI Lead (3m/10ft) for Cameras, Tablets and More
- UGREEN HDMI 2.1 Cable 3M for 8K Gaming
- KabelDirekt 4K Mini DisplayPort to DisplayPort Cable (5m) with AIS shielding – Thunderbolt 1/2 compatible
- Certified 10K/8K HDMI 2.1 Cable (3m) 48Gbps with Ethernet, eARC & 4K 240Hz support
- BENFEI USB C to HDMI Cable 1.8m – 4K@60Hz, Aluminium Shell, Thunderbolt 3/4 Compatible



