YAOHUOO Printer Stand, 22" x 15

Running out of desk space because your printer takes over the work area? This rolling stand gives it a dedicated spot while adding room for paper and office supplies.

The two open tiers and fabric drawer keep everyday items close without putting them on your desk.

Roll it out when you need to print, then tuck it under a desk or move it aside. The listed height is 15.8 inches, which may suit a compact workspace.

Quick sizing guide

The top measures 22 inches long by 15 inches wide, so compare those dimensions with your printer’s footprint before choosing a spot. That matters especially for larger machines: the listing says it fits most printers, scanners, fax machines, and 3D printers, but it doesn’t provide exact model-by-model compatibility. On the spec sheet, the height is 15.8 inches, intended to let the stand slide under most desks, desk clearance can vary, so measure the available space.

For a practical setup, place the printer on top, keep paper or folders on the lower open shelf, and use the fabric drawer for ink and pens. The four swivel wheels make it easier to move the setup between a desk and a nearby storage area, two wheels have brakes. The wheels can also be swapped for feet if you’d rather leave the cart stationary. Just remember that the footprint and the space needed to roll it out both count when planning a tight room.

Pros

• Adds printer storage without using more desktop space, with two open tiers and a drawer.
• Can be moved on swivel wheels or set up with feet instead.
• The metal frame and waterproof MDF board are listed with a capacity of 88 pounds per shelf, useful for a printer and paper storage within that limit.
• The listing describes assembly as taking about 15 minutes, with labeled, pre-drilled parts and no power tools required.

The tradeoff is that this is a compact printer station, not a general-purpose storage cabinet. The open shelves won’t conceal paper or folders, and the product details don’t give the drawer’s dimensions. If you need enclosed storage or have a printer with a wider footprint, a different stand may be a better fit.

Spec sheet

• Type: Two-tier rolling printer stand with drawer
• Size: 22 inches long by 15 inches wide
• Dimensions: 15.8 inches tall
• Material: Metal frame, waterproof MDF board, fabric drawer
• Capacity: 88 pounds per shelf
• Mobility: Four swivel wheels, two with brakes, wheels can be replaced with feet

Is it worth it?

Worth considering if you want to get a printer off your desk but still keep paper, folders, ink, and pens nearby. In a home office or dorm, it can make a simple printing routine easier: roll the stand beside your desk, print a document, then move the machine out of the way when the workspace needs to serve another purpose.

It’s not for you if your printer exceeds the 22-by-15-inch top, you need more than the stated shelf capacity, or you want fully enclosed storage. For those needs, a larger fixed cabinet or a stand sized to your specific machine is the more sensible approach. If the dimensions work and mobility is useful, this cart combines a printer surface with practical storage rather than asking you to give up another section of desk.