SZLliyxs XLR Pass-Through Cable, 2-Pack, 2 ft, Male D-Type to Male XLR

Some audio setups need a cable run between devices, others need a connection that terminates at a panel. The SZLliyxs XLR pass-through cables are designed for the second job, linking a male D-type panel mount with a male XLR connector.

This two-pack gives you matching connections for stage boxes, patch panels, and floor boxes. Each cable is 2 feet long, making it a practical fit for routing audio at a fixed panel point.

An all-metal housing, nickel-plated connectors, and interference shielding suit the cables to stage and studio audio setups. The plug-and-play design needs no power or configuration.

Tech specs

• Type: XLR pass-through cable
• Connector layout: Male D-type panel mount to male XLR
• Length: 2 feet
• Quantity: 2 cables
• Housing: All-metal
• Connectors: Nickel-plated
• Shielding: Anti-interference
• Recommended use: Audio transmission

Compatibility

The male-to-male XLR connection is intended for standard balanced XLR audio equipment. Use it to route a connection involving microphones, mixers, or amplifiers through a stage box, patch panel, or floor box. The panel-mount end provides a fixed connection point, while the male XLR end connects to compatible XLR equipment. This setup suits audio systems where a panel connection is part of the signal path, rather than a layout that relies only on loose cable runs between devices.

Practical tips

Mount the D-type panel connector at the intended connection point, then connect the male XLR end to the corresponding XLR connection in your audio setup. With no power or configuration required, the cable is ready for use once the panel connection is in place. Keeping the panel end at a defined location can make audio routing easier to organize around a stage box, patch panel, or floor box.

For a live setup, the cables can provide a panel-based connection between parts of an audio system. In a studio or permanent installation, they can help create a consistent XLR connection point where equipment needs to connect through a panel. The two-pack is useful when a setup calls for more than one matching pass-through connection. Its 2-foot length is suited to short runs near the panel, while the shielded construction and metal components are designed for use in working audio environments.

When it makes sense

Choose this SZLliyxs set when your audio routing needs a male D-type panel mount on one end and a male XLR connector on the other. It brings the same connector layout to two panel connection points, with a short 2-foot cable for each. That makes it relevant for stage boxes, patch panels, and floor boxes used with standard balanced XLR equipment. If you are organizing a fixed audio installation or adding panel connections to a live setup, this format gives you a direct, plug-and-play way to route audio through those locations.