XOOL Revolving Punch Plier Kit (rotary leather hole punch set) for belts, watch straps and DIY projects
Product description
The essentials
If you need neat round holes for belts, leather work, accessories or general crafts, the XOOL Revolving Punch Plier Kit is a punch-and-go style tool. It’s built around a rotating head so you can select different hole sizes without swapping tools, which is handy when you’re working through a set of straps, adjusting fit, or making repeats for home projects.
That said, it’s not the sort of tool you buy once and forget forever. With hole punches, the results depend quite a lot on the material (thickness, texture and how firm the surface is). So it’s a good fit for many makers and repair jobs, but it may feel limited if you’re expecting the same ease across very thick, stiff materials.
Key points
What stands out here is the “multi-hole” concept: you get six rotatable hole heads with sizes marked on the rotary part, so it’s quicker to pick the right taper than going hunting for a separate punch. The kit is aimed at punching round holes in leather hole punch territory, but the description also points to a broad range of uses such as belts, plastic, rubber, canvas, fabric, cardboard, saddles, shoes and similar materials.
It’s also designed with safety and control in mind. The build uses plated steel described as high hardness with good toughness, and there’s a spray lacquer finish intended to help reduce oxidation. For repetitive work, the tool focuses on ergonomics: a skid-mount/anti-skid bracket that can be adjusted for punching against a flat surface. That’s the sort of detail that can matter if you’re doing more than a one-off.
Worth considering if you do DIY home jobs, craft work, strap adjustments or occasional repairs and you want one tool that covers a handful of common hole sizes.
What you’ll notice day to day
On paper, this should feel practical for smaller batch work. The one-handed use approach is aimed at delivering stronger punches, with a palm-friendly fit and a skid mount for precision and comfort. In real use terms, that translates to less faffing about when you’re lining up a hole and more consistency when you’re repeating the same job across multiple items.
A small limitation to keep in mind: you can only work with the hole sizes provided (2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm and 4.5 mm). If your projects need sizes outside that range, you’ll still be looking at other punches or a different system.
Tech specs
- Type: Revolving punch plier / rotary hole puncher
- Hole sizes (rotatable heads): 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm
- Materials (described): plated steel body, metal treated with spray lacquer to help avoid oxidation
- Working range (as stated): leather, belts, plastic, rubber, canvas, fabric, cardboard, saddles, shoes and similar materials
Getting the most from it
To get cleaner holes, you’ll generally want a solid support surface. The adjustable anti-skid bracket can be opened and placed on a flat surface for seat-type punching, which the description positions as more labour-saving for precise punching. That’s especially relevant if you’re trying to keep alignment as you move across a strap or panel.
A practical example: if you’re adjusting a dog collar or crafting a small strap project, you can rotate the head to the marked size, hold the piece in position, then punch a neat row of matching holes without changing tools mid-way. For quick repairs on belts or watch bands, the marked head sizes are there to reduce guesswork when you’re selecting the right diameter.
Also worth noting that the punch plate thickness is designed to support safety and make auxiliary punching easier—still, you’ll want to take your time on first use to avoid misalignment.
Pros and cons
Why it makes sense: - Rotatable head with six marked hole sizes for faster selection - Designed for one-handed use and maximum force output - Ergonomic, anti-skid bracket system aimed at reducing hand fatigue during repetitive punching - Plated steel construction with a lacquer finish to help limit oxidation
What to watch: - Limited to the six hole sizes listed - As with any hand punch, performance can vary depending on material thickness and how well the workpiece is supported
Is it worth it?
Buy the XOOL Revolving Punch Plier Kit if you want a single rotary hole puncher for common round-hole diameters, and you regularly work on items like belts, watch bands/straps, saddles, shoes or craft materials where those six sizes cover your needs. It’s especially appealing for makers doing home DIY or small projects who value quicker size selection and a tool designed for repeatable, less tiring punching.
You may want to skip it if your projects require hole sizes outside 2 mm to 4.5 mm, or if you’re planning on consistently punching very tough, thick material where a specialised setup might be needed. If precision is your top priority, take a moment to think about support and alignment, because the “best results” will depend on how stable your surface is when you punch.
Mini FAQ
How many hole sizes does the rotary head include?
The kit includes six rotatable hole heads with sizes marked as 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm and 4.5 mm.
What materials is it intended for?
It’s described as suitable for punching round holes in leather, belts, plastic, rubber, canvas, fabric, cardboard, saddles, shoes and similar materials.
Is it designed for one-handed use?
Yes—its design is described as allowing one-handed use to help generate stronger punches.
Does it help with repetitive punching?
The description highlights ergonomics and an anti-skid bracket that can be adjusted for seat-type punching, which is intended to be more labour-saving for precise punching during longer sessions.
Does it protect against rust?
The metal surface is described as treated with a spray lacquer process intended to help avoid oxidation.