UpHere Gaming Up2TC6 ARGB White CPU Air Cooler
Product description
What it is and what problem it solves
The UpHere Up2TC6 ARGB White is a dual‑tower air cooler designed to tackle demanding CPUs. It aims to deliver strong heat dissipation for high‑TDP chips while keeping noise relatively low. If you’re building a PC that prioritises reliable cooling without resorting to liquid solutions, this cooler is positioned as a balanced option.
Key features you’ll notice on paper
This model uses 6×Φ6mm copper heat pipes and a dual‑tower layout to maximise contact with the CPU and transfer heat efficiently. The design promises 100% RAM clearance, which helps when your motherboard layout leaves little room for side‑mounted components. With 158mm total height, it’s meant to fit a wide range of cases and boards without crowding the RAM slots. Two PWM 120mm fans are included in a fully enclosed arrangement. The PWM control should help tune airflow and noise, and the stated noise level around 25 dB(A) at more moderate loads is typical for this class. The RGB feature is 5V ARGB, allowing you to sync lighting with other components for a cohesive look.
About compatibility and future‑proofing
The cooler is advertised as supporting a broad set of sockets: Intel LGA 1851/1700/1150/1155/1156/1200/1121/1366/1356/2011/2066 (X79/X99) and AMD AM5/AM4/AM3/AM2/FM2/FM1. If you’re planning a system upgrade or a multi‑socket build, this broad compatibility can reduce the need for a new cooler when you switch CPUs.
How it performs in everyday use
On paper, the Up2TC6’s dual‑tower and six copper pipes should offer solid heat transfer for CPUs up to around 265W TDP. In practice, the effective cooling will depend on case airflow, fan curve settings, and how tightly you mount the heatsink. It isn’t a premium closed‑loop solution, so it may require careful cable management and airflow planning to realise its full potential.
What works well for whom
If you prioritise a straightforward air‑cooling approach with decent headroom for modern CPUs, this cooler aligns with that goal. It’s suitable for mid‑range builds where you want reliable cooling without increasing noise dramatically or investing in liquid cooling.
Caveats: where it might fall short
It isn’t the smallest or cheapest option in its category, and true peak performance depends on the rest of your system’s cooling and case design. If you’re aiming for ultra‑quiet operation at very low temperatures, or you expect to push your CPU beyond 265W rarely but consistently, you may want to compare with higher‑end air coolers or consider other cooling strategies. Also, while RAM clearance is claimed to be 100%, real‑world clearance can vary with RAM height and VRM heatsink arrangements.
What to check before buying
- Verify your motherboard socket compatibility against Intel LGA 1851/1700/1150/1155/1156/1200/1121/1366/1356/2011/2066 and AMD AM5/AM4/AM3/AM2/FM2/FM1.
- Confirm your case has adequate clearance for 158mm height and enough fan‑airflow path to avoid bottlenecks.
- Consider your RAM height, although RAM clearance is advertised as 100%, very tall RAM kits or heavy heatsinks can impact fit.
- Plan for cable routing to keep the RGB connector and power cables tidy without obstructing fans.
Setting expectations against alternatives
Compared with low‑profile air coolers, the Up2TC6 offers greater heat‑spreading capacity thanks to the dual towers and copper pipes, which may suit CPUs that run hotter or are clocked. Against liquid cooling, it provides maintenance‑free operation and lower risk of leaks, but it won’t match extreme cooling performance under sustained overclocking. If you value quiet operation at high loads, you’ll want to test fan curves once installed.
Is it worth it?
Is it worth it? If you want a capable air cooler for a broad socket range with good RAM clearance, solid build, and RGB ambiance, the Up2TC6 presents a pragmatic option. It makes sense for a mid‑range build where you need dependable cooling without entering the complexities or costs of liquid cooling. It may not be the best pick if you’re chasing absolute silence at maximum load or if your case airflow is marginal.
Practical usage example
Imagine a mid‑range gaming rig where the CPU frequently hits higher boost clocks during long gaming sessions. With this cooler, you could expect steady temps provided the case moves enough air, the ARGB lighting adds visual appeal without distracting noise, and the installation process is straightforward enough to avoid frustrating fiddling with fans while mounting.
Quick FAQ
- Does it fit Intel LGA 1700? Yes, it lists LGA 1700 among its supported sockets.
- Will it fit in small cases? The 158mm height is relatively compact for a dual‑tower, but you should verify your case’s clearance and motherboard layout.
- Can I disable the ARGB? The feature is 5V ARGB, so you’ll need a compatible controller or motherboard header to manage lighting, otherwise lighting runs at default settings.
Final note: This cooler targets practical cooling with broad socket support and decent features. If your priorities are straightforward installation, reliable airflow, and a touch of style, it’s worth considering. If you expect maximum noise control or extreme overclocking headroom, you may want to compare alternatives and consider the total cost of ownership including case cooling and potential upgrades.