Description:
This full motion TV wall bracket for 42–90 inch TVs allows flexible positioning for large screens and supports heavier sets up to 68 kg, making it suitable for living rooms and home theatres where adjustable viewing angles matter. It ships with mounting hardware for solid concrete, brick or wood stud walls and includes a drilling template to simplify installation.
Key Points
The bracket offers wide compatibility with VESA patterns from 200 x 100 mm up to 600 x 400 mm and supports TVs from 42 to 90 inches. The dual arm design delivers a smooth swivel range of ±65° so you can turn the screen towards seating areas, while the tool-free tilt mechanism adjusts between +5° and -15° to reduce glare. 🛠️
Installation is made easier by a preassembled front support that cuts assembly steps, and clearly labelled parts help avoid confusion during mounting. Note that the mount is not intended for direct installation on drywall and must be fixed to solid concrete, brick or a timber stud wall according to the included instructions, which is important to achieve the stated load capacity. 🔩
Technical Specifications
- Name: Perlegear PGLF16
- Maximum load: 68 kg
- Screen compatibility: 42–90 inches
- VESA compatibility: 200 x 100 to 600 x 400 mm
- Extension from wall: 55.9 cm; retracted depth: 7.3 cm
Usage Recommendations
When positioning the bracket, extend the arms to fine tune the viewing angle and then use the tool-free tilt to adjust the vertical alignment without extra tools. For wall types that are uneven or composed of mixed materials, consider measuring and marking anchor points with the supplied drilling template to ensure the bracket sits level. Because the unit is UL-listed according to the manufacturer, follow the assembly sequence in the manual and tighten fastenings progressively to maintain alignment.
If you plan to route cables behind the TV, leave access room when the mount is fully retracted and when it is extended. The robust steel arms deliver increased strength over standard mounts, however check that the chosen wall anchors match the substrate and the combined weight of TV and accessories.










