OMIDEAS 10 Pack Flat Joining Plates (140 x 55 x 2mm) galvanised steel perforated connector plates
Product description
The essentials
If you’re building, repairing, or reinforcing timber structures, flat joining plates can be a simple way to add strength where two pieces meet. This OMIDEAS 10 pack is a set of galvanised, perforated plates designed to create a sturdier timber-to-timber connection (or timber-to-masonry/metal situations if you’re using suitable fixings).
On paper, what stands out is the perforated layout and the thickness: these are 2mm galvanised steel sheet plates, made for load distribution across the joint rather than relying on just a couple of fixing points. It’s the sort of component that works well for furniture assembly that needs to hold up, shelves that shouldn’t wobble, and outdoor timber repairs where you’d rather avoid bare steel.
Key points
These plates come as a 10 pack, with pre-drilled holes to speed things up at the fitting stage. Each plate measures 140 x 55mm and uses 2mm thickness, and the hole pattern is meant to spread forces through the connected surfaces. The galvanised finish is also there for corrosion resistance, which matters if the timber is used outdoors or in damp-prone areas.
One thing to keep in mind: screws are not included. So you’ll need to plan your fixings (screws or bolts) based on your timber thickness and the job you’re doing. If you already have suitable timber screws to hand, installation should be straightforward, if not, factor that into your shopping list.
Tech specs
- Type: Flat joining plates / perforated connector brackets
- Size: 140 x 55mm
- Thickness: 2mm
- Pack size: 10 x plates
- Holes per plate: 2 x Ø10mm and 20 x Ø5mm
- Material: Galvanised steel sheet
What stands out in day-to-day use
The perforations are the practical win here. By offering multiple fixing points along the plate, the load can be distributed across more of the joint, which helps reduce stress concentration at any single spot.
They also look built for regular DIY use: the holes are pre-drilled, so you’re not trying to measure and drill something perfectly in line once you’re already fitting timber in place. In a typical repair scenario—say you’re reattaching a cracked timber frame corner—these plates give you a clear “bolt-on” style reinforcement that’s easier to align than some custom brackets.
That said, this approach is only as good as your fixing choice. The plates provide the connection geometry, but performance depends a lot on the screws/bolts you use and how securely they bite into the timber.
Where it shines (and where it may fall short)
These plates are well suited to timber construction work such as building furniture, shelving, indoor timber structures, and DIY wood projects, including outdoor use thanks to the galvanised steel.
They may not be the best fit if you need a very specific structural engineering solution, or if your joint design requires a different connector shape (these are flat, straight plates). Also, because the hole sizes are specific (Ø10mm and Ø5mm), you’ll want to make sure your intended fixings match what the plates are set up for.
Compatibility
These are intended for fastening using screws or bolts through the pre-drilled holes. They should suit timber applications described by the pack listing, but you’ll still want to check your planned fixing type and size before committing.
Is it worth it?
Worth buying if you’re after a straightforward, galvanised, perforated joining plate for routine timber repairs, furniture build-outs, or shelf reinforcement—especially if you want multiple fixing points and faster installation thanks to pre-drilled holes.
You may want to skip it if you’re missing suitable screws/bolts (since none are included), or if your project needs a different bracket style or a connector that matches a specific structural requirement beyond basic reinforcement.
If you prioritise quick fitting and corrosion resistance for timber work (including outdoor situations), this pack makes practical sense. If you’re planning a job where compatibility of fixing sizes and joint geometry is critical, it’s worth double-checking that the plate hole pattern suits your chosen fixings.
Mini FAQ
FAQs
Do these plates come with screws?
No. The listing states that screws are not included, so you’ll need to supply your own suitable screws or bolts.
What are the plate dimensions?
Each plate is 140 x 55mm with a 2mm thickness.
How many holes do the plates have?
Each plate has 2 holes of Ø10mm and 20 holes of Ø5mm.
Are they suitable for outdoor timber work?
The galvanised steel and the description indicate they’re suitable for both indoor and outdoor applications.
Are they only for one type of project?
No—on the listing, they’re described as suitable for furniture, shelves, indoor and outdoor wood structures, and DIY projects, depending on your fixing setup.