ERYONE Matte PLA Filament 1.75mm (Rainbow Watercolor, 1kg spool) for FDM 3D printing
Product description
What it is and why people pick it
ERYONE’s Matte PLA filament is a 1.75mm FDM material supplied as a 1kg spool, aimed at everyday 3D printing where you want a consistent flow and a subdued, frosted “matte” surface rather than glossy colours. The key hook here is the multicoloured “rainbow watercolor” look, paired with a matte finish that’s meant to visually soften individual layer lines.
On paper, it also ticks a few practical boxes: it’s described as smooth and consistent, with a reported tolerance of +/-0.03mm for the filament diameter, and it’s claimed to print without clogging the nozzle or causing typical issues like stringing and warping. That’s the sort of combination many people want if they’re tired of fiddling mid-print.
The trade-off is fairly common with matte materials: the colour can look less “punchy” than some glossy filaments, and matte gradients rely more on design and lighting to really show off.
The essentials: what you’re actually getting
This is matte PLA in a frosted gradient colour style (called “Rainbow Watercolor” in the listing). The filament is marketed as tangle-free when unopened and described as “perfectly wrapped”. For people buying filament, this matters more than it sounds—tangles can turn a straightforward job into an avoidable headache before you even start.
The listing also mentions a “fast color change” over short runs (described as 5–8 metres), which is useful if you like prints where the colour transitions happen across the model rather than only at the spool end.
If you’re wondering how it feels in use, imagine printing a simple plant pot or desk organiser: the matte finish should make the layers less obvious, while the rainbow gradient can add visual interest without needing post-processing.
Key specifications that influence printability
The diameter is 1.75mm with a tolerance of +/-0.03mm. That level of consistency is often a big part of why some PLA spools feed more reliably than others, especially when you’re trying to keep extrusion stable across a full model.
The product description also claims strong layer adhesion and low deformation during printing, alongside printing with low odour. There’s no guarantee of perfect results on every machine (FDM printers still vary), but it points to an approach that prioritises steady extrusion and fewer failed prints.
Where it shines in day-to-day printing
This filament looks particularly suited to models where a matte aesthetic is the point. Because matte PLA is described as helping “hide the individual layers”, it’s a sensible choice for:
- Functional, everyday prints where you don’t want obvious striping
- Decorative pieces that benefit from frosted colours rather than shiny surfaces
- People who want multi-colour without manually swapping materials
It also claims to avoid stringing and warping, which is exactly what you want when your printer is doing long-ish runs or you’re trying to keep post-cleaning to a minimum.
What to keep in mind before you buy
It may not suit you if you’re chasing maximum colour intensity. The listing explicitly notes that matte filaments can come out with “lackluster colour” compared with expectations for brighter, glossy materials. In other words, matte looks great—but it’s not always the most vivid.
Also, the “universal compatibility” claim is broad. FDM printers vary a lot in how they handle PLA, so it’s worth checking your machine’s usual PLA settings and temperament rather than assuming it’ll behave identically to every other filament you’ve used.
One more practical limitation: if you’re very sensitive to tiny surface details, the matte effect helps visually, but it doesn’t replace fine calibration. You still need your printer dialled in.
Tech specs
- Type: Matte PLA filament
- Diameter: 1.75mm
- Diameter tolerance: +/-0.03mm
- Net weight: 1kg (2.2lbs) per spool
- Colour style: Multicoloured rainbow “watercolor” gradient
- Density: about 1.24 g/cm3
Final verdict
Is it worth it?
A solid pick if you want a matte PLA filament with a rainbow watercolor gradient and you prefer a material that’s described as smooth, consistent, and less prone to stringing or warping. It’s also a good fit if you care about layer appearance and would rather the surface look frosted and softened than glossy and line-sharp.
You may want to skip it if you’re specifically after very vivid, saturated colours, or if you need a filament that behaves perfectly on every machine without any tuning. Matte finishes can look a bit subdued, and “universal compatibility” is only as strong as your printer setup.
Mini FAQ
Does this filament come in a single colour or a gradient? It’s described as a frosted gradient with a rainbow watercolor look.
Is it meant to be easier to feed and less tangled? The listing says it’s tangle-free when unopened and wrapped to reduce tangling.
Will it clog the nozzle or cause extrusion issues? It’s claimed to flow smoothly and consistently without clogging the nozzle or extruder.
Is it suitable for most FDM printers? The description says it’s universally compatible with a wide range of FDM 3D printers, but your own PLA settings still matter.
What kind of results should I expect from the matte finish? Expect a very matte, frosted surface intended to help reduce the visibility of individual layers, rather than a glossy look.