ERYONE Matte PLA Filament 1.75mm (Matte Olive Green) – 1kg spool, +/-0.03mm
Product description
The essentials
ERYONE Matte PLA filament is a 1.75mm, matte-finish PLA made for FDM 3D printing, coming in a matte olive green colour and packed as a 1kg spool. On paper, it’s aimed at people who want the “matte look” of PLA rather than glossy prints, and who also care about consistent feeding and reduced print hassles.
Matte PLA is a little different to work with visually. Compared with shinier finishes, matte filaments can look less “layered”, which is useful if you want props, brackets, or display pieces to read cleanly at a glance. The trade-off is that matte colour can sometimes appear less vibrant than glossy—so it’s worth thinking about the look you want before you commit.
What it’s for (and how it feels in practice)
This filament is positioned as a smooth, consistent option for day-to-day FDM printing, with a focus on minimising problems like clogging or tangling. The base description claims: - A matte surface that helps hide the individual layers - Flow that’s smooth and consistent without clogging the nozzle or extruder - A tangle-free approach when the spool is unopened
In a real-world micro scenario: if you’re printing a small enclosure or a decorative panel, the matte finish can make layer lines less obvious, especially when viewed in normal lighting. You may still see layers up close, but the overall impression tends to be calmer than with a shiny filament.
That said, “no stringing and warping” is always a best-case claim and depends quite a lot on your printer setup (hotend, cooling, speed, and settings). It’s a solid starting point, not a guarantee that you’ll get perfect results on the first try.
Key takeaways (the parts that matter)
The headline benefit here is the matte effect. If your current PLA prints look too glossy or you’re trying to reduce the “striped” layer look, matte PLA is a sensible route. The second big focus is consistency: the filament diameter is 1.75mm with a stated tolerance of +/-0.03mm, and the description also mentions strong layer adhesion and low deformation during printing.
It’s also designed to print without excessive odour, which can matter in a UK home workshop where ventilation isn’t always ideal.
Finally, there’s a straightforward compatibility promise: it’s described as universally compatible with a wide range of FDM 3D printers. That’s helpful if you’re not using a specialised setup, but do still check your printer’s requirements for PLA filament (temperature range, feeding method, and nozzle size) before buying.
Tech specs
- Name: ERYONE Matte PLA Filament 1.75mm
- Type: PLA (matte filament for FDM 3D printing)
- Format: 1.75mm diameter
- Size: 1kg spool
- Capacity: 1kg (2.2lbs)
- Material: PLA
- Colour: Matte Olive Green
- Tolerance: +/-0.03mm
- Density: about 1.24 g/cm3
- Spool inner diameter: 57mm
- Spool outer diameter: 200mm
- Height: 64mm
Where it shines (and where it can fall short)
Where this makes most sense is when you want matte aesthetics and cleaner visual results from layer lines. It’s also a good fit if you care about consistent feeding, because the description emphasises smooth flow and an aim to avoid clogging.
It may not suit you if: - You mainly print functional parts that need the most demanding mechanical performance (the description focuses more on finish and handling than strength). - You already have a printing routine that’s very sensitive to filament behaviour, and you’re expecting the “perfect” stringing/warping outcome every time. - You prefer a glossy, highly saturated look—matte finishes can read a bit more muted depending on lighting.
Worth noting: the matte effect is very much part of the appeal, but it can also mean your prints won’t look like the glossy prototypes you might be used to with other filaments.
Getting the most from it
If you’re using it for a surface-facing project, consider doing a quick test print to dial in settings such as temperature, speed, and cooling. Matte PLA often rewards a bit of tuning because the final surface appearance is a mix of extrusion consistency and how well your layers settle.
Also, while the filament is described as tangle-free when unopened, storage still matters. Keep the spool in a dry place and avoid leaving it exposed in damp environments—PLA can be unforgiving if it absorbs moisture over time.
If you’re printing parts that don’t need a fancy surface, you might find yourself happier with a more basic PLA you already know. But if appearance is a priority, this matte option is designed to earn its place.
In the box
The product is supplied as a 1kg spool of ERYONE Matte PLA filament (matte olive green). The description also provides spool dimensions, which can help if you’re using a specific enclosure or mounting setup.
Is it worth it?
Buy it if you want matte PLA in 1.75mm with stated diameter tolerance (plus/minus 0.03mm) and you care about a finish that helps reduce the visibility of individual layers. It suits home users and makers running common FDM printers who want a dependable, broadly compatible filament for both practical prints and display pieces.
Don’t buy it if you need maximum performance over appearance, or if you specifically require a glossy look. It also might not be the best match if you’re expecting the “no stringing and no warping” promise to override your printer settings—matte PLA can still behave differently depending on your setup.
Mini FAQ
Is this filament suitable for all FDM printers?
The description says it’s universally compatible with a wide range of FDM 3D printers. In practice, you should still make sure your printer supports 1.75mm PLA and is set up correctly for your nozzle and temperature range.
What does the “matte effect” actually change?
A matte filament can make prints look less glossy and can help hide the individual layers, resulting in a more muted, frosted-style surface rather than a shiny finish.
Does it come as a 1kg roll?
Yes. The product is supplied as a 1kg spool (2.2lbs), with stated spool dimensions in the description.
Does it have a strong smell?
The description claims low odour during printing, which can be useful if you print indoors.
Could it still string or warp?
The description mentions “no stringing and warping”, but that’s dependent on your printer and settings. If your setup runs hot, lacks cooling, or uses aggressive speeds, you may still need to tune.