BERIXDEEP Dotless LED Strip Lights 15m (384 LEDs/m), DC24V COB tape, 6000K cool white (power supply not included)
Product description
What it’s for
BERIXDEEP’s dotless LED strip is aimed at people who want a continuous, even-looking line of light rather than the little “LED points” you can sometimes see on cheaper SMD-style tapes. On paper, this COB-style setup (described as “dotless”) is designed to help with backlighting and decorative installs where you’re viewing the strip from the side.
With a length of 15m and a stated density of 384 LEDs per metre, it’s positioned as a longer run option for things like under-cabinet lighting, TV backlight, shelving accents, wardrobes, stairs, or general indoor decoration. The supplied beam angle is 180°, which can also make it feel a bit more “spread” rather than relying purely on a narrow point source.
Key features at a glance
The most notable design idea here is the “dotless”/COB approach. Instead of relying on individual visible chips, the strip is described as being cut to length and reconnected every 50mm, which matters if you’re doing a run with awkward edges or need to trim down to fit a specific cabinet, shelf run, or layout.
It’s also specified as DC24V, with a cool white colour temperature of 6000K and a CRI of 92+. That CRI figure is the sort of detail you look for if colour accuracy matters a bit more than just brightness—especially for kitchens, display areas, or rooms where décor needs to look true-to-life rather than tinted.
Two other practical notes from the listing: - LED light output is described as 100lm/w (this is a spec, so it’s best treated as a guide rather than a guarantee of real-world performance in every installation). - The listing states that a power supply is not included. So while you can buy the strip itself, you still need to sort out the right driver/power setup to make it work.
The essentials (what you’ll notice day to day)
If you’re trying to avoid “dark spots” or visible dots along the run, this design is meant to address that directly. Dotless lighting can look more uniform when the strip is used for backlighting behind materials (like cabinet fronts, shelves, or display pieces).
The flip side is that the final look depends quite a bit on installation conditions. For example, if the strip is bent sharply, covered unevenly, or mounted at an odd angle, you can still end up with variation across the length—COB/dotless helps, but it doesn’t turn every DIY corner case into a perfect finish.
Where it tends to make the most sense is when the strip is used as a visual feature: behind a TV, along a wardrobe edge, or tucked under cabinets where you want a clean, continuous glow rather than separate points.
Technical overview
- Type: Dotless COB LED strip light
- Colour temperature: 6000K cool white
- CRI: 92+
- Power: DC24V
- Density: 384 LEDs/m
- Stated beam angle: 180°
- Length: 15m
- Cut & reconnect spacing: every 50mm
- Note: No power supply included
One detail to be aware of: the listing also mentions 24v and includes a statement that an adaptor is not included, so budgeting for the right electrical components is part of the purchase decision—not an afterthought.
Where it shines (and where it may not)
This is a sensible pick if your priority is a smooth, “no visible dots” look for indoor decoration and backlighting, particularly over longer runs where coverage matters. The combination of high LED density, dotless COB design, and a 6000K cool white tone can suit modern interiors that benefit from crisper, brighter lighting.
It may not be the best match if you’re looking for a fully packaged solution: the listing specifically says no power supply (and it also notes remote controller/adaptor not included). If you want a straightforward buy-and-go kit, you may find yourself doing extra work choosing a compatible driver.
Also, if you’re sensitive to cool white (some people find 6000K a bit clinical), you’ll want to double-check the colour temperature suits your room. It’s described as cool white for this version, so it won’t automatically “warm up” like 2700K/3000K options would.
Getting the most from it (practical buying checklist)
Before you commit, it helps to check a few things in your plan:
- Power planning: since no power supply is included, make sure your lighting setup has a suitable DC24V driver/psu for the total run you’re using.
- Run layout: because it’s cuttable every 50mm and described as re-connection capable, measure your straight sections and any corners so you’re not guessing when you come to trim.
- Mounting surface: dotless can look best with consistent mounting and a tidy diffuser/cover if your install calls for it. Uneven mounting tends to show more than you’d like.
A quick example: for a TV backlight, you’d typically measure the rear edge length, cut the strip at 50mm intervals to match, reconnect cleanly, then fix it under the lip behind the TV so the glow fills the wall rather than revealing the strip itself.
In the box / what’s missing
The listing indicates the strip comes without the power supply (and it also notes adaptor/remote controller aren’t included). That means you should expect to source the electrical components separately if you don’t already have a suitable DC24V setup.
Mini FAQ
Is this strip suitable for backlighting behind furniture?
Yes, it’s specifically framed for indoor decoration and backlight-style use cases such as TV backlighting and under-cabinet lighting. The dotless/dark-spot goal is also relevant for viewing the strip as part of the décor.
Does it come with a power supply?
No. The listing explicitly says no power supply is included, so you’ll need to buy the appropriate DC24V driver/psu separately.
Can it be cut and joined?
Yes, it’s described as cut-designed for every 50mm (and reconnection is mentioned). Make sure you follow the cut points during installation.
What colour is this version?
This specific version is 6000K cool white, with a stated CRI of 92+.
Is dotless lighting always evenly bright?
Not automatically. Dotless/COB helps reduce visible points, but your final evenness still depends on mounting, angles, and how the light is spread in your specific install.
Should you buy it?
This is worth considering if you want a long 15m DC24V COB/dotless LED strip for indoor décor, backlighting, and areas where you’d rather see a smooth line of light than separate LED “dots”. The cut/reconnect spacing at 50mm is also a practical advantage for DIY layouts.
You may want to skip it if you’re after a complete lighting kit, because no power supply/adaptor is included. And if cool white 6000K isn’t your preferred look, this exact version could feel a bit too crisp for your room.
In short: buy it when you’re comfortable planning the power side and you care about an even, dotless appearance in your installation.