Maxhood 3-Pack FC to LC Female Single-Mode Adapter (FC/UPC to LC/UPC) for 1310 & 1550nm
Product description
The essentials
If you’re managing a fibre setup, a small connector mismatch can turn into an annoying delay. This Maxhood 3-pack is designed specifically as a FC/UPC male to LC/UPC female hybrid optical fibre adapter, using single-mode 9/125um fibre. In plain terms, it lets you bridge an FC-ended patch cable to an LC-ended connection when you need the link to be consistent.
The listing also positions it as something you might use alongside optical testing, including continuity checks (the adapter includes the kind of hybrid conversion you’d expect for measurement workflows). It’s not trying to be a “specialist lab” part—more like a sensible set of adapters to keep your kit tidy and your tests moving.
What you’ll notice in use
Where this adapter makes sense is in everyday fibre work: moving between patch lead standards, setting up measuring gear, or keeping a continuity workflow straightforward. For example, if you have one FC/UPC patch lead but your meter/lead uses an LC/UPC port, this converter helps you avoid re-terminating cables just to get a reading.
The spec you’re given is also aimed at low-loss expectations for the common single-mode windows. That matters if you’re doing checks at 1310nm and 1550nm, not just plugging things in and hoping.
There’s one practical limitation to keep in mind: without real-world testing details (and with no mention of certification beyond the listed performance figures), you’ll still want to treat it as an adapter for the wavelengths and conditions the listing supports—rather than assuming it will suit every esoteric requirement you might encounter.
Key takeaways for buying
- You get three pieces in the pack, which is handy if you’re stocking spares for field work, workshops, or routine maintenance.
- It’s specified as single-mode 9/125um with FC/UPC to LC/UPC (so it’s about connector compatibility first).
- The stated performance figures are focused on 1310nm and 1550nm, with low insertion loss and strong return loss numbers.
- The sleeve material is listed as ceramics + metal, which suggests a more robust build than the flimsiest adapters.
That “3-pack” angle is probably the biggest value proposition here: instead of gambling on one adapter when you want redundancy, you get a small bundle for your toolbox.
Tech specs
- Type: FC/UPC male to LC/UPC female hybrid optical fibre adapter (Simplex)
- Fibre type: Single mode 9/125um
- Working wavelength: 1310nm & 1550nm
- Insertion loss: 1310nm/1550nm ≤ 0.2dB
- Return loss: 1310nm/1550nm ≥ 50dB
- Operating temperature: -40°C to +95°C
- Sleeve material: Ceramics + metal
Who it suits (and who should be cautious)
It’s a good fit if your priority is getting FC and LC sides to work together without re-terminating cables, particularly in setups that operate around 1310nm and 1550nm. If you do optical network maintenance, CATV/engineering maintenance, or continuity checks using suitable tools, keeping a few adapters on hand is often more practical than hunting for the right lead every time.
It’s not the best choice if you need a different connector standard or different fibre type than single-mode 9/125um—the whole point here is the FC/UPC to LC/UPC conversion. Also, if your work sits outside the listed wavelength windows, you may find the real-world performance is less predictable than what you need for that use.
Care and handling
With fibre adapters, the small details are what keep links stable. Even when the adapter itself is built for temperature and durability, it’s still worth handling it with care: keep the end-faces clean, avoid forcing connectors, and use sensible storage so you’re not just adding dust to your loss budget. The ceramic/metal sleeve should help with durability, but it won’t compensate for dirty or damaged connector faces.
Buying verdict
Worth considering if you’re building a practical fibre spares kit and need a straightforward FC male to LC female UPC adapter for single-mode 9/125um work at 1310nm and 1550nm. The 3-pack format is the part that feels most “purchase-ready” for real maintenance and testing workflows.
You may want to skip it if you don’t actually need the FC/UPC to LC/UPC conversion, or if your application isn’t centred on the listed wavelength range. In those cases, you’ll likely be better off choosing adapters that match your connector type and performance needs more directly.
Quick FAQ
Is this adapter single-mode only?
Yes—it's specified for single-mode 9/125um.
What wavelengths is it meant for?
It’s listed for 1310nm and 1550nm operation.
Does the pack include multiple adapters?
Yes, the bundle includes 3pcs FC-LC fibre optic adapters.
What does FC/UPC to LC/UPC mean?
It indicates the connector type and polishing format on each side: FC/UPC male connects to LC/UPC female.
Final decision: should you buy it?
If your job involves frequently bridging FC-ended patch cables to LC-ended connections for maintenance or measurement, this 3-pack is the sort of item that quietly earns its place in your toolkit.