USX STAR Full-Motion TV Wall Mount for 37–85-Inch TVs

For people who want to turn a fixed TV position into a more adjustable viewing setup, the USX STAR full-motion wall mount offers tilt and swivel in one bracket.

Its listed range covers 37- to 85-inch TVs, with support for sets up to 132 lbs. That makes screen size, weight, and mounting pattern the first things to match before choosing it.

The arm can sit close to the wall or extend outward, which is useful when seating or glare changes throughout the day. A solid pick if you want to angle the screen from more than one spot in the room.

Technical details

This articulating mount supports TVs up to 132 lbs and lists compatibility with VESA patterns from 200 × 100 mm through 600 × 400 mm, including several sizes in between. Its dual-arm design retracts to 2.59 inches from the wall and extends up to 16.69 inches.

For adjustment, the bracket tilts from +5° to -15° and swivels up to 45° in either direction, the maximum swivel depends on the TV’s size. The mount also allows a ±4° level adjustment. Those controls can help aim the screen toward a chair or reduce glare from a nearby window, though the actual viewing angle will depend on the room and screen dimensions.

Compatibility & requirements

The mount is listed for 37- to 85-inch TVs and wood studs spaced 8, 12, or 16 inches apart. It is also described for solid brick or concrete walls. Check the TV’s weight and VESA pattern against the listed limits, and make sure the wall and installation location suit the mounting method.

The package is described as including a drilling template, bubble level, instructions, and labeled standard hardware. Concrete anchors are not included by default, the maker says they can be requested. It might not be a great match if you need a mount with every concrete-wall fastener already in the box or if your TV falls outside the stated size, weight, or VESA range.

Usage tips

Before drilling, compare the TV’s VESA holes with the mount’s supported patterns and locate the intended stud spacing or suitable masonry mounting point. Use the included template and bubble level to help position the bracket. Once installed, the arm’s extension can bring the screen forward for viewing from an angled seat, then tuck it nearer the wall when that extra reach is not needed.

A fixed, low-profile mount may make more sense if the TV will always face the same seating position and you do not need tilt or swivel. This model trades that simpler approach for more adjustment, while its extended arm will take up more room than its retracted position.

Practical doubts

Does it swivel the same amount with every TV? No. The listing says the maximum swivel angle depends on screen size, even though the mount is rated for up to 45° in either direction.

Can it be used on a concrete wall? The product description lists solid brick and concrete, but concrete anchors are sent on request rather than included by default.

What should I check before installing? Match the TV’s weight, screen size, and VESA pattern to the mount’s stated limits, then confirm the wall type and stud spacing suit the installation.

Buying verdict

Choose the USX STAR if your TV fits its size, weight, and VESA specifications and you want to adjust the screen after mounting—especially for viewing from different seats or managing glare. Skip it if a fixed position is all you need, or if you cannot verify that your wall and TV match the listed requirements. Its clearest advantage is the combination of extension, tilt, and swivel, its main purchase condition is getting the compatibility details right before drilling.