BONTEC Fixed TV Wall Mount, 0.9-Inch Profile

What matters most

A large TV can take over a room when it sits on a stand. This fixed BONTEC mount keeps the screen close to the wall for a cleaner setup in a living room, media room, or office.

Its one-piece steel plate is designed for TVs from 43 to 100 inches and supports up to 265 lbs. The listed VESA range runs from 200x200 to 800x600mm.

At 0.9 inches from the wall, it prioritizes a low-profile look over the ability to angle or swivel the screen. Keep in mind that some VESA patterns, including 300x200 and 300x300, may not center the TV on the mount.

The broad plate and positioning grooves are intended to help align larger screens, while the auto-locking latches engage when you lower the TV into place. For removal, a pull on the release cords holds the latches open, so you can lift the screen without keeping tension on them. The cords can extend below a 100-inch TV or tuck behind the screen.

Fit and sizing

The mount is listed for flat or curved TVs measuring 43 to 100 inches, but screen size alone does not determine fit. Check your TV’s weight, VESA pattern, and rear-port clearance against the mount before choosing it. The maximum supported weight is 265 lbs, and the supported VESA range is 200x200 to 800x600mm.

For installation, it fits 16-, 24-, and 32-inch wood studs, as well as solid brick or concrete walls. It must not be installed directly into drywall alone. A printed template and built-in level help with marking and alignment, the mount also offers ±1° of post-installation adjustment to correct minor leveling errors.

This is a fixed mount, so it suits a viewing position you can settle on. If you need to turn the TV toward different seats or adjust its angle, a tilting or full-motion design is a better match. A solid pick if you want a large screen close to the wall and have a compatible mounting surface.

Tips for day-to-day use

Before drilling, compare the TV’s VESA measurements and weight with the mount’s limits, then account for where cables and rear ports sit. The shallow 0.9-inch gap gives the screen a neat, close-to-wall appearance, but it also leaves less room behind the TV than a more extended mount. Plan cable access before hanging a large screen.

During installation, use the included template and level to mark the mounting points, and attach the mount to suitable wood studs or solid masonry—not drywall by itself. Once the TV is lowered into position, the automatic latches are intended to lock, the pull cords provide access when you need to release them. Not the best choice if you want to routinely reposition the screen or if your TV’s pattern falls outside the listed range.

Before you decide

Can it hold a 100-inch TV? It is listed for TVs up to 100 inches and 265 lbs. The TV’s weight and VESA pattern still need to fall within the mount’s stated limits.

Can I install it on drywall? Not directly into drywall alone. The listed installation surfaces are 16-, 24-, or 32-inch wood studs, or solid brick and concrete.

Does the TV sit flush against the wall? It sits 0.9 inches from the wall, giving it a low-profile position without being completely flush.

Is it worth it?

This BONTEC mount makes most sense when the priority is a simple, fixed, close-to-wall installation for a compatible large TV. The one-piece steel plate, locking latches, and small leveling adjustment address practical setup concerns, while the template and built-in level may help with alignment. It is a more space-conscious approach than choosing a mount that extends or swivels, but gives up that flexibility. Choose it when your TV matches the VESA and weight limits and you have a suitable wall surface, look elsewhere if you need adjustable viewing angles or your TV’s VESA pattern may not center.