USX MOUNT Heavy-Duty Tilting TV Wall Mount for 60–120" up to 220 lb (Low-Profile, Ultra-Slim)
Product description
Key takeaways
If you’re putting up a very large TV and want a wall mount that feels solid, the USX MOUNT heavy-duty tilting model is designed around that job. On paper it’s a strong match for extra-large screens, with a one-piece steel build meant to handle heavier loads, plus a small tilt range to help with glare and viewing comfort.
That said, it’s not a “grab-and-go” mount for every wall type. It’s meant for stud-based installs (wood studs) and also supports concrete/brick walls, but it’s not for drywall alone. If your setup isn’t compatible, you’ll spend more time and money making it work than you probably want.
What to know before you buy
The core idea here is straightforward: mount a big, heavier TV close to the wall while still getting some control over the angle. The mount supports 60–120 inch TVs and a maximum weight rating of 220 lb. It’s also engineered for VESA patterns up to 900x600, which matters a lot when you’re shopping for large TVs because size alone doesn’t tell you whether the mount will physically line up.
The included tilting feature is modest but useful: tilt 5° up or 12° down. That’s typically the kind of adjustment that helps if your TV is mounted above eye level—common in living rooms where the layout doesn’t allow a perfect centered height.
One more practical detail: the low-profile design installs just 2.6 inches from the wall. That flush look is great when you care about a clean setup or you’re trying to keep the TV from protruding too far.
Where it may fall short for some people is installation assumptions. The instructions include the hardware and guidance, but you still need the right wall conditions—this is not a drywall-only solution.
Where it shines
There’s a lot to like for large-screen buyers who want a stable, clean wall look:
- Built for big TVs and heavier weights: With a 220 lb capacity and rigid one-piece steel construction, it’s positioned as a “serious” mount rather than a light-duty option.
- Glare and sightline help: The 5° up / 12° down tilt range gives flexibility when seating height and mounting height don’t match.
- Ultra-slim appearance: With the mount sitting about 2.6 inches from the wall, the TV should look more integrated than it would on bulkier brackets.
- Wider stud spacing flexibility: It fits wood studs spaced up to 32 inches apart, which can make the planning phase easier.
A small micro-scenario: imagine mounting your 75–90 inch TV higher than you’d normally place it over a fireplace. Tilting down a bit can reduce glare from overhead lights and make the screen easier to see from the couch without having to re-mount at a perfectly centered height.
Tech specs
- Type: Tilting TV wall mount (low-profile, ultra-slim)
- Size compatibility: 60–120 inch TVs
- Weight capacity: up to 220 lb
- Tilt range: 5° up / 12° down
- Installation depth: installs about 2.6 inches from the wall
- Stud spacing (wood): fits wood studs spaced up to 32 inches apart
- VESA support (max): 900x600mm
- VESA positioning note: measure your TV’s VESA pattern and weight first
Installation fit & requirements
This is a mount you should verify against your wall situation before you commit. The provided guidance indicates it can be installed on wood studs (no need for concrete anchors) and on concrete and brick.
If your wall is drywall alone, that’s specifically called out as not supported. So if your plan is “mount it straight into drywall,” you may want to skip this one and look for a solution designed for your wall type.
Also, the seller notes concrete anchors can be available upon request. If you’re installing on masonry and you’re not sure what’s included for your exact scenario, it’s worth checking so you don’t get stuck mid-project.
Who it’s for (and who should avoid it)
This mount makes sense if you’re shopping for a heavy-duty, tilting wall bracket for a large TV (60–120 inch range) and you care about keeping the TV close to the wall for a cleaner look. It’s also a good candidate if your viewing angles would benefit from a small adjustment rather than a full-motion system.
You may want to avoid it if: - your TV’s VESA pattern is outside the stated support (max 900x600mm) - your TV’s weight is above the 220 lb rating - your installation is drywall-only, because the product guidance says it’s not meant for that - you need more than a limited tilt range (this is not described as a full-motion mount)
Final verdict
The USX MOUNT heavy-duty tilting TV wall mount is a solid choice when you’re pairing a large, heavier TV with a wall setup that supports stud, concrete, or brick mounting. Its one-piece steel approach, 220 lb capacity, and low-profile 2.6-inch install are built around the “big screen on the wall” reality.
Where you should be cautious is compatibility: confirm your TV’s VESA pattern and weight first, and don’t assume it works for drywall alone. If you’ve got the right wall conditions and the VESA alignment checks out, this is the kind of mount that can make a large TV installation look tidy while giving you just enough tilt to improve viewing day to day.
Mini FAQ
Is this mount compatible with curved TVs?
The description lists compatibility for both flat and curved screens within the stated size and VESA support range.
How much does it tilt?
It tilts 5° up and 12° down.
How far does it sit from the wall?
It installs about 2.6 inches from the wall.
Can it be installed on drywall?
No—installation is not for drywall alone. It’s intended for wood studs, concrete, and brick.
What should I measure before buying?
You should measure your TV’s VESA pattern and its weight first.