J&D D-Type XLR Cable, 2 Feet
Product description
Getting the most from it
When you’re adding an XLR connection to a stage box, patch panel, floor box, or other surface-mounted audio setup, a short pigtail can be more useful than routing a full-length cable through the enclosure. This J&D D-Type XLR cable has a male-to-female pass-through connector and is designed for those installations. Its no-solder setup keeps the job simpler when you’re repairing or upgrading a panel.
Each cable is 2 feet long, and the package includes two. From the way it is set up, this is a panel-installation part, not a replacement for a long mic cable running across a room.
Why it’s worth it
The main advantage is combining a panel-style D-type connector with a short XLR lead, rather than piecing together a longer cable for a fixed connection. For example, while refreshing a stage box, you can route the pigtail inside the box and connect the XLR ends without soldering. Locking mechanisms on both connectors are intended to help keep the connection in place during use.
The cable uses gold-plated copper contacts, zinc-alloy shells, and reinforced 6mm nylon-braided shielding. Those construction details suit a connection that may be handled during equipment setup, though they don’t tell you how it will perform in every audio system. If you prioritize an easier panel installation, the pass-through design is the draw, if you prefer one long cable for general mic placement, a conventional XLR cable is the more relevant purchase. A one-year warranty is included.
At a glance
- Connector type: D-type XLR, male to female
- Installation: No-solder pass-through pigtail
- Cable length: 2 feet per cable
- Package: Two cables
- Construction: Nylon-braided shielding, 6mm thick, zinc-alloy shells, gold-plated copper contacts
- Connection: Locking mechanisms on both XLR connectors
- Listed uses: Stage boxes, patch panels, panel mounts, and floor boxes
Worth considering if you’re repairing or building a fixed audio connection and want to avoid soldering. The short lead is useful where the connection sits close to its mounting point, but it limits how far you can place connected equipment from the panel.
Is it worth it?
This cable makes the most sense when the job is specifically to add or replace a short XLR connection in a mounted audio panel. The two-pack may also be practical when you’re working on more than one connection at once. Its locking connectors and braided covering address common handling concerns, while the no-solder format keeps installation straightforward.
Better avoided if you need a general-purpose cable to reach a microphone across a stage, or if your setup calls for a different connector or a longer run. The listing doesn’t specify additional audio measurements or compatibility details, so match the D-type format and 2-foot length to your enclosure before choosing it.