Nilight Trailer Hitch Ball Mount with 1/2" Hitch Pin Clip (Fits 1-1/4" Receiver) – 5" Rise, Class 2
Product description
If your trailer rides a little too high or you’re tired of mismatched hitch parts, a proper ball mount can make life a lot easier. The Nilight trailer hitch ball mount is built for standard 1-1/4 inch receivers and includes a 1/2 inch hitch pin clip to help you secure it quickly. On paper, it’s aiming at everyday towing setups—travel trailers, campers, and hauling tools/gear—where you want a straightforward way to get the right ride height.
That said, it’s not a universal solution. You still need to confirm your receiver size and the hitch ball shank size you’re planning to use, because the hitch ball is sold separately.
The essentials
This Nilight ball mount is designed to slide into a 1-1/4 inch trailer hitch receiver (it’s described for a Class 2 setup). The mount provides a 5 inch rise, which is intended to help keep the trailer level behind your vehicle—useful when your tow vehicle sits higher than the trailer tongue or when your setup benefits from additional lift.
It also includes a 3/4 inch hole built to accommodate a trailer hitch ball with a 3/4 inch shank diameter (the trailer ball itself is not included). So, the big idea is simple: get the rise you want, then pair it with the correct hitch ball.
Key points: what you’ll notice in real use
The most practical win here is convenience. Installation is described as a matter of inserting the ball mount into your 1-1/4 inch receiver, then securing it with a hitch pin and clip. The included 1/2 inch hitch pin clip is meant to make that step less fiddly.
Also, the included rise is a clear, measurable spec: 5 inches. If you’ve been dealing with a trailer that sits noticeably nose-down, you’ll likely care about that number right away.
Still, it’s worth being a bit cautious: if you need a different rise/drop than 5 inches, or your hitch ball doesn’t match the 3/4 inch shank size, this setup can feel like the “almost right” piece that won’t fully solve your problem.
Where it shines (and where it may feel limiting)
What it’s good for: - Trailer towing setups that use a standard 1-1/4 inch receiver - Situations where a 5 inch rise helps you promote a more level tow - Practical towing use like hauling a camper/trailer or moving items with a compatible hitch ball
Where it may not fit your needs: - If your receiver isn’t 1-1/4 inch, this won’t be the right match. - If you already have (or plan to use) a hitch ball with a different shank diameter than 3/4 inch, you’ll need to change the ball or choose a different mount. - If you’re trying to spec a heavy-duty towing setup beyond the stated limits, you’ll want to double-check your requirements first.
Tech specs
- Receiver fit: 1-1/4 inch standard hitch receiver
- Rise: 5 inch rise
- Hitch pin clip: 1/2 inch (included)
- Hitch ball hole: 3/4 inch hole (for 3/4 inch shank hitch ball)
- Mount shank size: 1-1/4 inch x 1-1/4 inch
- Included: ball mount plus hitch pin and 1/2 inch clip
- Hitch ball: not included (sold separately)
- Weight capacity (as stated): 3,500 lbs gross trailer weight, 350 lbs tongue weight (listed as total trailer weight and tongue weight limits)
Getting the most from it
The best results usually come from matching the setup in the order that actually matters: receiver size first, then the rise you need, then the hitch ball shank size.
A quick example: if you’re hooking up a camper and you notice the front of the trailer sits low, you’d look for a mount with a rise—this one is 5 inches. Once you confirm your vehicle has a 1-1/4 inch receiver and you have (or buy) a trailer hitch ball with a 3/4 inch shank, the install is basically plug-in and secure.
One limitation to keep in mind: the ball mount’s listing capacity is only useful if your towing setup stays within those stated limits. If you’re near the top end of what you tow, it’s smart to verify everything in your real configuration before relying on the mount alone.
What’s included
The package includes: - 1 ball mount designed for a 1-1/4 inch receiver - Hitch pin and 1/2 inch hitch pin clip - The hitch ball is sold separately
Mini FAQ
Is the hitch ball included?
No. The ball is sold separately. This mount is intended for a hitch ball with a 3/4 inch shank diameter.
What receiver size does it fit?
It’s described as fitting a standard 1-1/4 inch hitch receiver.
How does installation work?
Insert the mount’s shank into the receiver, then secure it with the included hitch pin and 1/2 inch clip.
How much rise does it provide?
It provides a 5 inch rise.
Should you buy it?
A solid pick if you already have a 1-1/4 inch receiver, you want a 5 inch rise to promote a more level tow, and you’re planning to use a 3/4 inch shank hitch ball (sold separately). It’s also a practical choice if you’d rather avoid extra searching for the pin/clip hardware, since the kit includes a 1/2 inch hitch pin clip.
You may want to skip it if your receiver size isn’t 1-1/4 inch, if your current hitch ball shank doesn’t match the 3/4 inch hole, or if your towing needs don’t line up with the stated gross trailer weight and tongue weight limits. In those cases, it can end up being an expensive “almost fit” problem rather than a clean upgrade.