Nilight 2-Pack 6-Pin Waterproof Momentary Rocker Switches (ON)-Off-(ON) DPDT
Product description
If you’re wiring up auxiliary lighting in a vehicle or marine setup, a basic toggle usually isn’t enough—especially once water and salt air enter the picture. This Nilight 2-pack uses a waterproof design and a momentary rocker layout with an (ON)-Off-(ON) behavior, so you can control two circuits through a single switch in a clean, compact way.
It’s not a “smart” switch and it’s not trying to be. It’s built for practical use: rugged plastic, conductive pins, and a straightforward install. The real question is whether the 6-pin DPDT momentary setup matches how your harness is currently wired and what you’re trying to control.
The essentials
This switch set is a 2-pack of 6-pin momentary rocker switches rated for 20A/12VDC and 10A/24VDC (as stated in the listing). The (ON)-OFF-(ON) function and DPDT design (double pole double throw) are meant for switching between two “on” positions while the off position is in the middle.
On the page, you’ll see typical intended uses like rear lights, rock lights, LED light bars, LED work lights, fog lamps, headlights, taillights, and auxiliary lamps. In other words: it’s aimed at people who want a simple, dedicated control switch for aftermarket or utility lighting rather than constantly reaching for a factory harness toggle.
What it’s good at in real wiring
The upside of this style of rocker is the feel and repeatability. In day-to-day use, you’re not guessing where the switch ends up—you flip to one side for one lighting behavior, and the other side for the alternate behavior, with OFF centered. If you’re building a setup for off-road or towing lighting, that matters more than people expect.
A practical example: imagine you’ve got a pair of LED pods you want to run together in one mode and a different pair (or a different power path) in another. With a DPDT approach, you can design the wiring so each side of the rocker sends power to the path you want, while OFF blocks the output.
Waterproof design: where it earns its keep
The listing calls out waterproof construction and positions it as a marine-style replacement for certain waterproof toggle switches. That’s a meaningful differentiator if your environment includes rain exposure, spray, washing, or coastal conditions.
That said, “waterproof” doesn’t automatically mean “submerged indefinitely” or “installer-proof.” So if your mounting allows gaps or your wiring connections aren’t protected, you may still run into trouble. The switch can be the right part, but installation quality still matters.
Tech specs that affect buying decisions
- Type: Momentary rocker switch, (ON)-Off-(ON), DPDT (6-pin)
- Ratings: 20A/12VDC and 10A/24VDC (per listing)
- Waterproof design: yes (marketed as waterproof/marine replacement)
- Included: 2x 6-pin momentary rocker switches, 2x jumper wires set, and 1x diagram
Is it the right match for your setup?
It’s a solid pick if you specifically need a 6-pin momentary rocker switch with DPDT behavior and you’re upgrading or replacing a failed switch in an existing harness. It also makes sense if you’re adding controls for auxiliary lighting where a simple on/off control isn’t enough and you want the two “on” positions to represent two different power paths.
It may not suit you if your current switch setup isn’t compatible with a 6-pin DPDT momentary requirement, or if you’re trying to replace a different type (the listing mentions replacing defective 6-pin SPST switches, but you still need to confirm your wiring intent). It might also feel like overkill if all you need is a single on/off circuit and you’re not using the DPDT switching behavior.
What to double-check before you buy
Before you commit, it’s worth confirming a few practical things:
- Your harness and cutout/fitment expectations for a 6-pin rocker switch (the listing emphasizes “easy to install,” but physical mounting still varies by project).
- Whether your lighting circuit plan actually benefits from DPDT (two separate “on” sides) rather than a basic single-circuit switch.
- The voltage/circuit load for what you plan to run, since the stated ratings are a key limitation.
Final verdict
So, should you buy it?
Buy the Nilight 2-Pack if you need a waterproof, momentary (ON)-Off-(ON) rocker switch with DPDT functionality for controlling aftermarket or utility lights in cars, trucks, boats, ATVs/UTVs, or RV setups. The bundle—including jumper wires and a diagram—helps reduce the “where do I start?” feeling when you’re wiring from scratch.
Skip it if you only need a simple single-circuit on/off control, if you’re not confident your wiring matches the 6-pin DPDT momentary style, or if your installation won’t protect connections from moisture. On paper it’s a straightforward, rugged part, but it still has to match your wiring plan.
FAQ
What does (ON)-Off-(ON) mean on this rocker switch?
It’s the switch’s on/off behavior: one side engages one “ON” position, the center is OFF, and the other side engages the alternate “ON” position. That’s the core reason it’s useful for DPDT-style wiring.
Is this switch really waterproof for marine use?
The listing describes it as waterproof and notes it as a marine-style replacement for some waterproof toggle switches. For best results, make sure mounting and wiring connections are done in a way that keeps moisture out.
Does the package include wiring help?
Yes. The bundle includes a set of jumper wires and a diagram, which should help if you’re mapping your connections.
What loads is it rated for?
The listing provides ratings of 20A/12VDC and 10A/24VDC, so your connected lighting should stay within those limits for safety and reliability.
Can it replace other switches?
The listing suggests it can replace defective 6-pin SPST switches. Still, you should verify your existing wiring needs align with a 6-pin DPDT momentary design before swapping.