New Bee Guitar Cable 15ft instrument cable 🎸

This 15-foot instrument cable from New Bee connects guitars, basses, mandolins and pro audio gear while focusing on clear signal transfer and flexible handling for stage and studio use. It aims to reduce hum and interference during practice or performance, making it a practical choice for players who need a reliable cord between instrument, pedalboard and amplifier.

Key Points

The cable uses 22 AWG oxygen-free copper center conductors to improve signal transmission, and a high-density stranded copper double shield to cut down on electromagnetic noise during use. PVC insulation keeps the overall jacket supple, which helps when coiling or running the cable across a pedalboard. The product includes straight-to-straight 1/4-inch metal plugs so it can be plugged directly into most instrument and amp jacks without adapters. For onstage setups where a right-angle plug is preferable, alternate versions are available from the same line according to the manufacturer. Consider that long cables can introduce a small amount of capacitance, which may slightly affect very high-frequency response on some instruments.

Technical Specifications

• Name: New Bee Guitar Cable 15ft
• Length: 15 ft
• Conductor: 22 AWG oxygen-free copper
• Shielding: high-density stranded copper double shield
• Insulation: PVC jacket
• Connectors: 1/4-inch straight to straight metal plugs

Benefits

The cable’s construction prioritizes low noise and consistent fidelity, which helps preserve your instrument’s tone through effects chains and amplifiers. Flexibility of the PVC jacket makes it easier to route and store without excessive kinking. Metal plug housings offer a sturdy connection that resists loosening after repeated use, and the cable overall presents a balance between portability and durability for rehearsals and gigs. According to the manufacturer, the dual shielding and oxygen-free conductors are intended to reduce unwanted interference during live or studio applications.

Usage Recommendations

When using the cable on stage, avoid stepping directly on the cable near the connector to reduce strain at the plug. Rolling the cable using an over-under technique will extend its life and keep it from developing memory. For pedalboard setups, keep cable runs as short as practical to minimize any tonal change produced by capacitance. If you need a right-angle plug for a compact instrument jack, check the product variations in the same series to match your setup.

Note: The description relies on specifications provided by the manufacturer and no additional measurements or test results have been added.