Lielyhod Wireless HDMI Extender with 4 Receivers

How to use it

A long HDMI cable can make a meeting room or living room harder to arrange, especially when the same source needs to reach several screens. This Lielyhod wireless HDMI kit sends video and audio from a source device to multiple displays without running HDMI cable between them.

The package is described as including a transmitter and four receivers. Connect them to the source and displays, install the antenna, and the maker says the link is ready in about five seconds without an app, Bluetooth, or Wi-Fi setup.

For example, you could connect a laptop at one end of a conference room and send its presentation to TVs around the space. The LED screen shows connection, signal, output, and power status, which gives you a useful place to start if a display is not receiving a picture.

Pros

• The included four receivers suit a setup that needs several screens from one HDMI source. The system can support up to six displays, but adding receivers beyond the included set requires additional units.
• The transmitter supports 4K input, while the stated output is 1080p at 60Hz. That distinction matters: this is for sharing a source on 1080p displays, not delivering 4K output.
• The package lists an HDMI-to-USB-C conversion cord and mini HDMI and micro HDMI adapters. These broaden the connection options for devices with those outputs, though the source still needs to provide a compatible video signal.
• The wireless range is listed as up to 165 feet in line of sight. The maker also claims latency below 0.1 seconds, according to the maker.

You’ll appreciate it if you want to reduce cable runs for presentations, classrooms, or multi-screen viewing and can work within a 1080p output limit. Would the status screen help when you’re setting up several displays? It can make connection checks more straightforward than troubleshooting a link with no visible feedback.

Spec sheet

• Type: Wireless HDMI transmitter and receiver system
• Format: One transmitter with four receivers described as included
• Capacity: Up to six screens with additional receivers
• Resolution: 4K input support, 1080p output
• Refresh rate: 60Hz
• Wireless range: Up to 165 feet in line of sight
• Signal bands: 2.4GHz and 5GHz
• Connections and adapters: HDMI, HDMI-to-USB-C conversion cord, mini HDMI adapter, and micro HDMI adapter
• Display: LED screen for connection, signal, output, and power status

An antenna must be installed for operation. Range and signal speed can be affected by solid walls, so the stated distance is most relevant when the transmitter and receivers have a clear path. It also does not replace a wired setup when you need 4K output or must route a signal through obstructed rooms.

When it makes sense

This kit is aimed at places where one source needs to appear on several screens: a meeting room, classroom, bar, restaurant, or home theater. It favors flexible placement over the simplicity of a single direct HDMI cable. If you only need to connect one nearby display, a regular cable is a less complicated approach, if you need higher-resolution output, this model’s stated 1080p ceiling is a meaningful trade-off.

It may not suit you if your setup depends on 4K output, has thick walls between the transmitter and receivers, or needs a receiver for every screen beyond the four described as included. The listed 24-month warranty and replacement service may also be relevant if you expect to rely on the system regularly, but the product details do not specify how performance varies across different source devices. Choose it when multiple 1080p screens and fewer long cable runs matter more than an unobstructed 4K signal.