EVIL ENERGY 6AN Fuel Line Kit 10ft 🛠
Product description
This 6AN braided fuel hose kit brings durable routing and pressure handling for motorsport and performance projects. It suits fuel, oil, transmission fluid and race gas, offering a compact 10ft length for custom runs. If you prioritize a reinforced assembly for higher working pressures, this kit answers that need, if you prefer ultra-flexible plumbing for tight bends you may want to check bend radius carefully.
Key points

Built around a CPE rubber core with a 304 stainless steel wire layer and a nylon outer braid, this AN6 hose blends chemical compatibility and abrasion resistance. The specification includes a working pressure rated at 750 psi and a burst pressure of 2250 psi according to the manufacturer, and a temperature range from -22°F to 248°F which covers most street and track conditions. Expect a moderate minimum bending radius of 63.5 mm, so plan routing accordingly when space is tight. 🏁


Tech specs

- Reference: EVIL ENERGY 6AN Fuel Line Kit
- Size: ID 0.31" (8 mm), OD 0.56" (14.3 mm)
- Length: 10ft
- Working pressure: 750 psi
- Burst pressure: 2250 psi
- Temperature range: -22°F to 248°F
- Material: CPE rubber inner, 304 steel wire layer, nylon outer braid
Why it makes sense



For fabricators and racers this hose delivers a balance of pressure capability and chemical resistance, making it useful for fuel, diesel, hydraulic fluid and transmission lines. It's practical for custom installations where a 10ft run avoids extra joins and reduces leak points. Keep in mind the specified bend radius when installing in cramped engine bays, and follow recommended clamp and fitting practices to maintain the pressure rating. 🔧
Everyday use

Routing is straightforward for those used to aftermarket plumbing, and the braided finish resists abrasion from chassis contact. EVIL ENERGY 6AN Fuel Line Kit is mentioned here once as a clear identifier and to help match fittings. If longevity matters, the stainless wire layer and nylon braid add mechanical protection while the CPE core preserves fluid compatibility. ⚙️
Products with discounts that might interest you
- BDFHYK Electric Fuel Pump Assembly E4123M for Silverado 1500 & Sierra 1500 (2014-2018)
- ANCEL S3000-US Smoke Machine Leak Detector
- APUS RV Tankless Water Heater: 80,000 BTU Propane On-Demand, 5 GPM, 12V, CSA Certified
- BDFHYK E2297S Electric Fuel Pump Assembly for Ford Expedition and Lincoln Navigator
- EVIL ENERGY 6AN Fuel Line Kit 25FT 🛠
- caqeg AD1011 10AN Female to 3/8-Inch Barb Hose Fitting, Black Aluminum
- EVIL ENERGY 6AN Fuel Line Kit 20ft
- EVIL ENERGY 8AN Fuel Line Kit, 20 ft CPE Nylon-Braided Hose with 12 Pieces
- EVIL ENERGY 6AN Braided Fuel Hose 20FT ⛽
- NQN 12-Foot RV Quick-Connect Propane Hose with Stainless Steel Braid
- EVIL ENERGY 6AN Braided Fuel Line Kit with 20 ft Nylon-Reinforced Hose and 10 SAE Ends
- Tnisesm Mini Fuel Injection Hose Clamp Kit, 125-Piece, 304 Stainless Steel
- Tutor Auto E7265M Fuel Pump Module Assembly for Jeep Wrangler, with Sending Unit
- ACDelco U7000 Professional Fuel Tank Selector Valve
- EVIL ENERGY 8AN Braided Fuel Hose, 5 ft, CPE and 304 Stainless Steel
- Tutor Auto 5136023 Electric Fuel Pump Module Assembly with Left & Right Sending Units
- EVIL ENERGY 6AN PTFE Fuel Line Kit, 20 ft, 1,500 PSI, E85 Compatible
- Tutor Auto E3609M Fuel Pump Module Assembly with Pressure Sensor for Silverado & Sierra
- WIX Fuel Filter 33133
- EVIL ENERGY 10AN Fuel Line Kit 20FT
- BOSCH 0261230161 fuel pressure sensor
- EVIL ENERGY 10AN Braided Fuel Line AN10
- EVIL ENERGY 10AN to 1/2 in NPT Fitting
- EVIL ENERGY 6AN 90° Swivel Hose Fitting 1500 PSI



