EVIL ENERGY 8AN Fuel Line Kit, 20 ft CPE Nylon-Braided Hose with 12 Pieces
Product description
For routing a transmission cooler line or setting up a fuel supply or return line, this kit pairs a 20-foot 8AN hose with swivel ends in several angles. Its braided hose has a CPE rubber inner tube, stainless steel reinforcement, and a nylon outer layer. The assortment is intended to give installers options for routing around nearby components. Fluid compatibility and fitting size are important checks before you choose it.
Quick overview

The kit includes one 20-foot hose, 10 swivel hose ends (four straight, two 45-degree, two 90-degree, and two 180-degree), and two hose separator clamps. The hose is listed as 8AN, with a 3/4-16 UNF thread. Aluminum alloy fittings and multiple end angles may be useful when a straight connection would not suit the planned route.
The stated compatible fluids include gasoline, diesel, race gas, engine oil, transmission fluid, and hydraulic fluid, vacuum applications are also listed. It is not compatible with E85, E10, or methanol. Buyers commonly appreciate the kit’s completeness and ease of assembly, and some report using it for transmission cooler lines. Feedback is mixed on leaks, fit, and durability, including reports of fittings leaking after adjustments, so careful assembly and inspection matter.



Fit and sizing
The detailed product information gives an inner diameter of 0.41 inches and an outer diameter of 0.65 inches. A separate dimensions field lists the width as 0.64 inches, so there is a small discrepancy in the stated outside measurement. Check clearance against the actual hose dimensions before routing it through a tight space.

This is an 8AN setup, not a universal hose-and-fitting kit. The listing specifically warns that AN and NPT fittings are not interchangeable. Confirm both the thread type and available installation space for your application rather than relying on a similar-looking connection. The supplied ends offer several angles, but they do not remove the need to plan the route and connection points.
Everyday use



A practical use case is a custom transmission cooler line where the installer needs to route hose between connection points and choose angled ends to suit the layout. The included separator clamps help keep hose sections organized, while the mix of straight and angled swivel ends provides more routing choices than a kit with straight ends only. The hose is also listed for fuel supply or return, oil feed, vacuum, and other fluid-line applications, subject to its stated fluid limits.
There is an important specification inconsistency to resolve for pressure-sensitive applications: the feature details state a 750 PSI working pressure and 2,250 PSI burst pressure, while another specification lists 500 psi as the maximum pressure. Do not treat those figures as interchangeable, confirm the applicable rating before relying on the hose in a setup with a required pressure limit.

Before you decide
Which fluids are listed as compatible? Gasoline, diesel, race gas, engine oil, transmission fluid, and hydraulic fluid are named, along with vacuum applications. E85, E10, and methanol are specifically excluded.



What comes in the kit? One 20-foot hose, 10 swivel hose ends in four angle configurations, and two hose separator clamps.
Will the fittings work with NPT connections? The listing says AN and NPT fittings are not interchangeable. Match the connection type to your application before ordering.
When it makes sense
It makes sense if you need a 20-foot 8AN hose kit with several fitting angles for a compatible fluid-line project and can confirm the thread, space, and pressure requirements. You may want to skip it if your application uses E85, E10, or methanol, requires NPT fittings, or depends on a clearly established pressure rating that the supplied specifications do not state consistently.
Products with discounts that might interest you
- EVIL ENERGY 6AN PTFE Fuel Line Kit, 20 ft, 1,500 PSI, E85 Compatible
- Tnisesm Mini Fuel Injection Hose Clamp Kit, 125-Piece, 304 Stainless Steel
- EVIL ENERGY 8AN Braided Fuel Hose, 5 ft, CPE and 304 Stainless Steel
- Tutor Auto E3609M Fuel Pump Module Assembly with Pressure Sensor for Silverado & Sierra
- EVIL ENERGY 6AN Fuel Line Kit 10ft 🛠
- ACDelco U7000 Professional Fuel Tank Selector Valve
- ANCEL S3000-US Smoke Machine Leak Detector
- BDFHYK E2297S Electric Fuel Pump Assembly for Ford Expedition and Lincoln Navigator
- caqeg AD1011 10AN Female to 3/8-Inch Barb Hose Fitting, Black Aluminum
- NQN 12-Foot RV Quick-Connect Propane Hose with Stainless Steel Braid
- Tutor Auto E3621S Electric Fuel Pump for 1988–1995 Chevy/GMC C/K Trucks
- EVIL ENERGY 6AN Braided Fuel Line Kit with 20 ft Nylon-Reinforced Hose and 10 SAE Ends
- Tutor Auto E7265M Fuel Pump Module Assembly for Jeep Wrangler, with Sending Unit
- WIX Fuel Filter 33133
- EVIL ENERGY 10AN to 1/2 in NPT Fitting
- EVIL ENERGY 6AN 90° Swivel Hose Fitting 1500 PSI
- AN4 to 1/8 NPT Adapter, 6061 Aluminum
- 1/4 Inch (6mm) ID Fuel Line Hose — 25 FT 300PSI NBR Rubber Push Lock for Automotive
- EVIL ENERGY 8AN Fuel Line AN8 10 ft
- EVIL ENERGY 3AN Male Flare to 1/8" NPT Adapter
- MANN-FILTER WK 820/15 Fuel Filter for Mercedes Sprinter (Without Integrated Fuel Heating)
- SYKRSS E3581M Electric Fuel Pump Module Assembly (Replaces MU1639, 19256621) for 2004-2007 Tahoe/Yukon/Escalade V8
- BDFHYK Electric Fuel Pump Assembly E4123M for Silverado 1500 & Sierra 1500 (2014-2018)
- APUS RV Tankless Water Heater: 80,000 BTU Propane On-Demand, 5 GPM, 12V, CSA Certified

