EVIL ENERGY 6AN Fuel Line Kit 25FT 🛠
Product description
Key points
This PTFE nylon braided fuel line kit aims to simplify LS swap and EFI conversion plumbing while handling high temperature and pressure. It addresses common installation headaches by offering a ready set of fittings and 25FT of reinforced hose, so routing for fuel supply or return runs is cleaner and more consistent. The first paragraph follows a problem to solution flow and highlights that an LS swap EFI fuel line kit helps prevent leaks and withstands harsher conditions for longer operation. ✅



Tech specs
- Name: EVIL ENERGY 6AN 3/8" PTFE LS Swap EFI Fuel Line Fitting Kit
- Size: ID 5/16" (0.31"), OD 0.45", Length 25FT
- Material: PTFE nylon braided
- What’s included: fittings and hose as shown
- Reference: Working pressure 1,500 PSI



Best use cases
Use this kit when converting carbureted setups to EFI or when fabricating an LS engine swap that requires durable feed and return lines. The hose is suitable for fuel injection, turbo oil feed, transmission cooler line, and vapor or vacuum lines in high temperature environments. It is compatible with common automotive fuels and lubricants, which reduces the need to source separate hoses for each circuit. ⚙️

The kit performs well where routing is exposed to heat from turbochargers or exhaust components, and the PTFE core helps the line resist fuel-induced degradation. Note that the hose is relatively rigid, so sharp folds or tight coils should be avoided. Professional installation is recommended to ensure fittings are tightened to spec and clear of sharp edges. 🔧

Handling and installation tips are practical and direct. Measure ID and OD before cutting, plan routing to minimize bends, and use proper clamps where the manufacturer calls for them. Keep in mind the working temperature range, from -76°F to 446°F, and that bursting pressure is significantly higher than working pressure according to the manufacturer. This kit focuses on durability and compatibility, offering a balanced option for builders looking for consistent fuel delivery for EFI LS swaps.
Products with discounts that might interest you
- EVIL ENERGY 10AN to 1/2 in NPT Fitting
- caqeg AD1011 10AN Female to 3/8-Inch Barb Hose Fitting, Black Aluminum
- EVIL ENERGY 6AN 90° Swivel Hose Fitting 1500 PSI
- EVIL ENERGY 8AN Braided Fuel Hose, 5 ft, CPE and 304 Stainless Steel
- AN4 to 1/8 NPT Adapter, 6061 Aluminum
- NQN 12-Foot RV Quick-Connect Propane Hose with Stainless Steel Braid
- 1/4 Inch (6mm) ID Fuel Line Hose — 25 FT 300PSI NBR Rubber Push Lock for Automotive
- Tnisesm Mini Fuel Injection Hose Clamp Kit, 125-Piece, 304 Stainless Steel
- EVIL ENERGY 8AN Fuel Line AN8 10 ft
- Tutor Auto E7265M Fuel Pump Module Assembly for Jeep Wrangler, with Sending Unit
- EVIL ENERGY 3AN Male Flare to 1/8" NPT Adapter
- ACDelco U7000 Professional Fuel Tank Selector Valve
- ANCEL S3000-US Smoke Machine Leak Detector
- BDFHYK E2297S Electric Fuel Pump Assembly for Ford Expedition and Lincoln Navigator
- EVIL ENERGY 6AN PTFE Fuel Line Kit, 20 ft, 1,500 PSI, E85 Compatible
- Tutor Auto 5136023 Electric Fuel Pump Module Assembly with Left & Right Sending Units
- EVIL ENERGY 8AN Fuel Line Kit, 20 ft CPE Nylon-Braided Hose with 12 Pieces
- Tutor Auto E3609M Fuel Pump Module Assembly with Pressure Sensor for Silverado & Sierra
- MANN-FILTER WK 820/15 Fuel Filter for Mercedes Sprinter (Without Integrated Fuel Heating)
- SYKRSS E3581M Electric Fuel Pump Module Assembly (Replaces MU1639, 19256621) for 2004-2007 Tahoe/Yukon/Escalade V8
- BDFHYK Electric Fuel Pump Assembly E4123M for Silverado 1500 & Sierra 1500 (2014-2018)
- APUS RV Tankless Water Heater: 80,000 BTU Propane On-Demand, 5 GPM, 12V, CSA Certified
- EVIL ENERGY 6AN Fuel Line Kit 20ft
- EVIL ENERGY 6AN Braided Fuel Hose 20FT ⛽



